Description
Properties
| Recommended applications | It is solely intended to heat up bearings, gears and other industrial annular components. |
| Workpiece weight (max) | 5 kg |
| Heating temperature (max) | 200 °C |
| Workpiece bore diameter | 20 – 100 mm |
| Workpiece width (max) | 50 mm |
| Power consumption (max) | 0.35 kVA |
| Current consumption (max) | 2 A |
| Voltage | 220 – 240 V |
| Voltage frequency | 50 – 60 Hz |
| Heating temperature control | 40 – 200 °C |
| Heating temperature steps | 1 °C |
| Temperature measurement | Magnetic probe K-type |
| Heating time control | 0.1 – 60 min |
| Heating time steps | 0.1 min |
| Thermometer mode | Yes |
| Time mode | Yes |
| Power setting |
10%
25%
50%
100%
|
| Demagnetisation after heating (according SKF norms) | 0 A/cm |
| Error guiding codes | Yes |
| Thermal overload protection | Yes |
| Cooling fan | No |
| Colour |
Blue
Dark Grey
|
| Housing material | Special PA, overmoulded with TPU rubber |
| Content |
TMBH 5 heater with power cable
Clamp
Bearing holder
Probe
Heat resistant gloves
Printed instructions for Use
|
| Total product weight | 3 kg |
Spare part
| SKF Heat Resistant Gloves TMBA G11 | TMBA G11 |
| Temperature probe, magnetic K-type incl. cable 600mm (23.6 in) and plug for TMBH 5 | TMBH 5-3 |
| Heating clamp (incl. cable and plug) | TMBH 5-4 |
| Bearing holder | TMBH 5-5 |
(TMBH5/230V) (replaces TMBH1)
