Description
Properties
| Recommended applications | Intended for heating up roller bearings that are mounted with an interference fit on a shaft. Other ring-shaped metallic components can also be heated. |
| Workpiece weight (max) | 20 kg |
| Heating temperature (max) | 200 °C |
| Workpiece bore diameter | 30 – 320 mm |
| Workpiece width (max) | 85 mm |
| Power consumption (max) | 2.3 kVA |
| Current consumption (max) | 10 A |
| Voltage | 220 – 240 V |
| Voltage frequency | 50 – 60 Hz |
| Heating temperature control | 40 – 200 °C |
| Heating temperature steps | 1 °C |
| Temperature measurement | Magnetic probe K-type |
| Heating time control | 0.1 – 60 min |
| Heating time steps | 0.1 min |
| Thermometer mode | Yes |
| Time mode | Yes |
| Power setting |
10%
25%
50%
100%
|
| Demagnetisation after heating (according SKF norms) | 0 A/cm A/cm |
| Error guiding codes | Yes |
| Thermal overload protection | Yes |
| Cooling fan | Yes |
| Colour |
Blue
Dark Grey
|
| Housing material | Glass fiber filled special PA |
| Content |
TWIM 15 heater
Power cable
Probe
Heat resistant gloves
Printed instructions for Use
|
| Total product weight | 6.86 kg |
Recommended product
| SKF Induction Heater TWIM 15K (230 V version) kit with carrying bag | TWIM 15K/230V |
