WSTUC 40M-TPZM

Take-up composite unit with insert ball bearing, set screw locking and extended inner ring, not standardized, SKF Food Line

Take-up ball bearing units for the SKF Food Line consisting of an insert bearing based on a sealed deep groove ball bearing mounted in a composite housing.

They are strong, yet lightweight, and chemically resistant to detergents and contaminants. Typically mounted in take-up frames, the unit has an inner ring extended on both sides and is locked by tightening a set screw on the inner ring, that makes it easy to mount.

  • Strong, yet lightweight
  • Chemically resistant
  • Designed for an alternating rotation
  • Well suited to follow the highest food safety standards
  • Reliable in wet environments

Dimensions

d
40 mm
Bore diameter
d1
51.8 mm
Shoulder diameter of inner ring
Dc
88 mm
Centring diameter
Ha
6 mm
Groove height for backseal
A
41 mm
Overall width
A1
16 mm
Width of piloting groove
A2
32 mm
Width of flange in which piloting grooves are provided
A5
70.9 mm
Standout of end cover
B
49.2 mm
Width of inner ring
B4
8 mm
Distance from locking device side face to thread centre
H
113 mm
Overall height
H1
101.8 mm
Distance between bottoms of piloting grooves
H2
46 mm
Height of attachment end
L
134 mm
Overall length
L1
85 mm
Distance from attachment end face to centre line of spherical seat diameter
L3
80 mm
Length of piloting groove
G
M16
Thread size attachment end
G1
24 mm
Thread length
s1
30.2 mm
Distance from locking device side face to raceway centre

Calculation data

Basic dynamic load rating C
30.7 kN
Basic static load rating C0
19 kN
Fatigue load limit Pu
0.8 kN
Limiting speed
2 800 r/min
Limiting speed with shaft tolerance h6

Mounting information

Set screw G2
M8x1
Hexagonal key size for set screw
4 mm
Recommended tightening torque for set screw
6.5 N·m

Properties

Housing type Take-up
Retaining feature, inner ring Set screws
Bore type Cylindrical
Rubber seating ring Without
Material, housing Composite for the SKF Food Line
Material, bearing Bearing steel
Coating Zinc-coated bearing
Sealing, bearing Seal and flinger on both sides
Sealing type Contact, gutter
Sealing, unit Optional end cover
Lubricant Grease
Relubrication hole Without
Grease fitting Without
Compliance with standard
Not standardized
Purpose specific
For food and beverage applications
Material, housing
Composite for the SKF Food Line
Sealing, bearing
Seal and flinger on both sides
Sealing type, bearing
Contact, gutter
Sealing, unit
Optional end cover
Coating
Zinc-coated bearing

Logistics

Product net weight 0.913 kg
eClass code 23-05-08-02
UNSPSC code 31171536

Component

Insert bearing with set screw locking and extended inner ring YAR 208-2LPW/ZM

Recommended product

End cover for bearing units ECB 508

(WSTUC40M-TPZM) (WSTUC-40M-TPZM)

Additional information

Weight 0.913 kg
Colour

You may also like…