UCFC 217 (Y/UCFC 217)
Round flange ball bearing unit with extended inner ring and set screw locking, cast iron housing, JIS
These round flanged ball bearing units are compliant with JIS standards.
They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.
- Resist high levels of contamination
- Designed for high temperatures and speeds
- Accommodate relatively heavy loads
- Cost-effective
Dimensions
| d |
85 mm
|
Bore diameter |
| d1 |
≈105 mm
|
Outer diameter of inner ring |
| A |
62.5 mm
|
Width of housing |
| A1 |
10 mm
|
Flange width |
| A3 |
18 mm
|
Height of spherical seat centre |
| B |
85.7 mm
|
Width of inner ring |
| B4 |
12 mm
|
Distance from locking device side face to thread centre |
| Db |
187.3 mm
|
External diameter |
| Dc |
180 mm
|
Centering diameter |
| J |
208 mm
|
Pitch diameter of attachment bolts |
| J1 |
147.1 mm
|
Distance between attachment bolts |
| L |
250 mm
|
Outside diameter |
| N |
23 mm
|
Length of attachment bolt hole |
| s1 |
51.6 mm
|
Distance from locking device side face to raceway centre |
| T |
69.6 mm
|
Overall width |
THREADED HOLE
| RG |
1/8-27 NPT
|
Housing thread for grease fitting |
| R1 |
23 mm
|
Axial position of the housing thread |
GREASE FITTING
| DN |
6.589 mm
|
Diameter of head sphere of grease fitting |
| SWN |
11.11 mm
|
Hexagonal key size for the grease fitting |
| GN |
1/8-27 NPT
|
Thread of grease fitting |
Calculation data
| Basic dynamic load rating |
C |
83.2 kN
|
| Basic static load rating |
C0 |
64 kN
|
| Fatigue load limit |
Pu |
2.5 kN
|
| Limiting speed |
|
1 800 r/min
|
|
|
Limiting speed with shaft tolerance h6
|
Mounting information
| Set screw |
G2 |
M12x1.5
|
| Hexagonal key size for set screw |
|
6.08 mm
|
| Recommended tightening torque for set screw |
|
28.5 N·m
|
| Recommended diameter for attachment bolts, mm |
G |
20 mm
|
| Recommended diameter for attachment bolts, inch |
G |
0.75 in
|
