UCP 205-15 (Y/UCP 205-15, UCP 205-015)

Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards

Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface.

This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.

  • Strong
  • Designed for a constant and alternating rotation
  • Ready to mount
  • Lubricated and sealed bearing
  • Quick locking onto the shaft
  • Cost-effective

Dimensions

d
23.812 mm
Bore diameter
d1
33.7 mm
Shoulder diameter of inner ring
A
38 mm
Base width
A1
23 mm
Top width
B
34 mm
Width of inner ring
B4
5.5 mm
Distance from locking device side face to thread centre
H
36.5 mm
Height of spherical seat centre
H1
16 mm
Foot height
H2
70.5 mm
Overall height
J
105 mm
Distance between attachment bolts
J
max.110 mm
Distance between attachment bolts
J
min.100 mm
Distance between attachment bolts
L
139.5 mm
Overall length
N
13 mm
Diameter of attachment bolt hole
N1
18 mm
Length of attachment bolt hole
s1
19.7 mm
Distance from locking device side face to raceway centre
THREADED HOLE
RG
1/4-28 UNF
Housing thread for the grease fitting
R1
1.5 mm
Axial position of the housing thread
Rα
45 °
Angular position of the housing thread
GREASE FITTING
DN
6.6 mm
Diameter of head sphere of grease fitting
SWN
7.94 mm
Hexagonal key size for the grease fitting
GN
1/4-28 UNF
Thread of grease fitting

Calculation data

Basic dynamic load rating C
14 kN
Basic static load rating C0
7.8 kN
Fatigue load limit Pu
0.335 kN
Limiting speed
5 850 r/min
Limiting speed with shaft tolerance h6

Mounting information

Set screw G2
1/4-28 UNF
Hexagonal key size for set screw
3.225 mm
Recommended tightening torque for set screw
4 N·m
Recommended diameter for attachment bolts, mm G
10 mm
Recommended diameter for attachment bolts, inch G
0.375 in

Properties

Housing type Pillow block
Number of bolt holes for fasteners 2
Fastening bolt hole type Plain
Retaining feature, inner ring Set screws
Bore type Cylindrical
Rubber seating ring Without
Material, housing Cast iron
Material, bearing Bearing steel
Coating Without
Sealing, bearing Seal and flinger on both sides
Sealing type Contact, standard
Sealing, unit Without
Lubricant Grease
Relubrication hole With
Grease fitting With
Compliance with standard
JIS
Purpose specific
For material handling applications
Material, housing
Cast iron
Sealing, bearing
Seal and flinger on both sides
Sealing type, bearing
Contact, standard
Sealing, unit
Without
Coating
Without

Logistics

Product net weight 0.88 kg
eClass code 23-05-16-02
UNSPSC code 31171536

(UCP205-15) (Y/UCP205-15) (UCP205-015)

Additional information

Weight 0.88 kg
Colour

You may also like…