They enable the incorporated bearings to achieve maximum service life with less need for maintenance. Oil seals are supplied together with the housing as a unit.
| Da |
460 mm
|
Diameter of bearing seat |
|---|---|---|
|
G7
|
Tolerance class of bearing seat diameter | |
| Ca |
168 mm
|
Width of bearing seat |
| H1 |
280 mm
|
Centre height of bearing seat |
| A1 |
280 mm
|
Foot width |
|---|---|---|
| A2 |
315 mm
|
Width across oil seals |
| G2 |
M8
|
Thread for condition monitoring |
| H |
551 mm
|
Overall height |
| H2 |
105 mm
|
Foot height |
| L |
790 mm
|
Overall length |
| J |
670 mm
|
Distance between attachment bolts |
| J1 |
160 mm
|
Axial distance between attachment bolts |
| N |
50 mm
|
Length of attachment bolt hole (radial) |
| N1 |
42 mm
|
Width of attachment bolt hole |
| s |
16 mm
|
Offset of bearing axis |
| PG |
G 3/8
|
Oil inlet for oil bath lubrication |
|---|---|---|
| QG |
G 1/4
|
Oil inlet for circulating oil lubrication |
| RG |
G 1 1/4
|
Oil outlet |
| R1 |
330 mm
|
Distance between oil outlets |
| R2 |
52 mm
|
Distance from housing bottom to oil outlet |
| J6 |
740 mm
|
Distance between dowel pins |
|---|---|---|
| N4 |
20 mm
|
Diameter of dowel pins |
| P0° |
4 000 kN
|
Breaking load at 0° load angle |
|---|---|---|
| P55° |
5 000 kN
|
Breaking load at 55° load angle |
| P90° |
2 400 kN
|
Breaking load at 90° load angle |
| P120° |
1 800 kN
|
Breaking load at 120° load angle |
| P150° |
1 600 kN
|
Breaking load at 150° load angle |
| P180° |
2 000 kN
|
Breaking load at 180° load angle |
| Pa |
1 300 kN
|
Breaking load, axial |
| Q120° |
2 860 kN
|
Load to reach yield point at 120° load angle |
|---|---|---|
| Q150° |
1 650 kN
|
Load to reach yield point at 150° load angle |
| Q180° |
1 430 kN
|
Load to reach yield point at 180° load angle |
| Housing material |
Cast iron
|
| Corrosion protection |
Paint – in accordance with ISO 12944-2, corrosivity category C2
|
| Recommended diameter of attachment bolts | G |
36 mm
|
|---|---|---|
| Recommended tightening torque for attachment bolts |
2 280 N·m
|
|
| Size of cap bolts |
M30x200
|
|
| Tightening torque for cap bolts |
400 N·m
|
|
| Size of eye bolt |
M24
|
|
| Oil level, max. | h |
87 mm
|
| Oil level, min. | h |
75 mm
|
| Breather plug |
TSFT/N 3/8
|
| Housing type | Plummer/pillow block |
| Housing configuration | Two-piece |
| Mounting arrangement | Through shaft/Shaft end |
| Number of bolt holes for fasteners | 4 |
| Material, housing | Cast iron |
| Bearing housing seal type | Without |
| Housing lubrication feature/possibility | Grease |
| Product net weight | 251 kg |
| eClass code | 23-05-17-01 |
| UNSPSC code | 31171519 |
(SNL3060TURT)
| Weight | 251 kg |
|---|---|
| Size (mm) | |
| Colour |
Petaling Jaya Motors Supply was established in 1966 providing Bearing and other industrial parts needs for various industries. Thus, in our partnership with you, we bring you our varied expertise garnered from the years of experience in these industries.
© 2025 Petaling Jaya Motors Supply Sdn Bhd (196601000054) (006532-X). All Rights Reserved.
