A synthetic oil based grease using the latest complex calcium sulphonate thickener technology. It is suitable for applications subjected to high loads, wet environment and fluctuating temperatures encountered in the food and beverage industry.
| Recommended applications |
Pellet presses
Mills
Mixers
|
| Suitable for High load applications | ++ |
| Suitable for Vertical shaft applications | Ο |
| Suitable for applications with Oscilating movements | ++ |
| Suitable for applications with Severe vibrations | Ο |
| Suitable for applications that require Rust protection | + |
| Suitable for applications that require Water resistance | ++ |
| Suitable for applications that require Frequent start-up | ++ |
| Speed (max.) n x dm (x 1000) | 300 |
| Operating temperature range | -40 – 140 °C |
| Dropping point (min) ISO 2176 | 300 °C |
| Penetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm) | 280-310 |
| Penetration DIN ISO 2137, Prolonged (max.), 100 000 strokes, 10⁻¹mm | +30 |
| Mechanical stability – Roll stability, ASTM D1831 (max.) 50 hrs at 80°C, 10⁻¹mm | +30 |
| Mechanical stability, V2F test, 144 hrs | – |
| Corrosion protection, Emcor, ISO 11007, Distilled water | 0-0 |
| Corrosion protection, Emcor, ISO 11007 modified, Water washout | 0-0 |
| Corrosion protection, Emcor, ISO 11007 modified, 0.5% NaCl | 1-1 |
| Water resistance (max.) DIN 51807/1, 3 hrs at 90 °C | 1 |
| Oil separation DIN 51817, 40°C, % | 1-3 |
| Lubrication ability, R2F test B at 120°C | Pass |
| Copper corrosion (max.) DIN 51811 /ASTM D4048, 24 hrs at 100°C | 1b |
| Rolling bearing grease life (max.) ROF test, L50 life, 10000 r/min, hrs at °C | 1000 at 130°C |
| EP performance – 4 ball – Wear scar (max.) DIN 51350/5, 1400N | 1 mm |
| EP performance – 4 ball – Weld load (min.) DIN 51350/4 | 4 000 N |
| Low temperature torque, Start/Running, mNm | 369/223 at -40°C |
| DIN 51825 code | KP1/2N-40 |
| NLGI consistency class | 1-2 |
| Thickener | Calcium sulphonate complex |
| Colour | Brown |
| Base oil type | Synthetic (PAO) |
| Base oil viscosity DIN 51562 at 40 °C | 320 mm²/s |
| Base oil viscosity DIN 51562 at 100 °C | 30 mm²/s |
| Certifications |
NSF H1
Halal
Kosher
|
| NSF Registration no. | 153759 |
| Pack size | 180 kg drum |
| Available for single point lubrication | yes |
(LGFQ2/180) (LGFQ-2/180)
| Weight | 180 kg |
|---|---|
| Colour |
Petaling Jaya Motors Supply was established in 1966 providing Bearing and other industrial parts needs for various industries. Thus, in our partnership with you, we bring you our varied expertise garnered from the years of experience in these industries.
© 2025 Petaling Jaya Motors Supply Sdn Bhd (196601000054) (006532-X). All Rights Reserved.
