GEH 20 ESX-2LS
SKF Explorer radial spherical plain bearing, virtually maintenance-free, sealed, metric sizes
These radial spherical plain bearings have an SKF Explorer steel/steel sliding contact surface combination.
They are initially lubricated and have a triple-lip, heavy-duty contact seal on both sides. Compared to conventional steel/steel bearings, they have increased dynamic load ratings. Compared to the GE series, they have a wider inner ring and a larger outside diameter, which enable higher load ratings and larger tilt angles.
- Designed for radial and combined radial and axial loads
- Long service life
- Virtually maintenance-free
- Suitable for heavy static or impact loads
- Enable larger tilt angles
Dimensions
d |
20 mm
|
Bore diameter |
D |
42 mm
|
Outside diameter |
B |
25 mm
|
Width |
C |
16 mm
|
Width outer ring |
α |
17 °
|
Angle of tilt |
dk |
35.5 mm
|
Raceway diameter inner ring |
b |
3.1 mm
|
Width annular lubrication groove at outer ring |
b1 |
3.2 mm
|
Width annular lubrication groove at inner ring |
M |
2 mm
|
Diameter lubrication hole (outer ring) |
r1 |
min.0.3 mm
|
Chamfer dimension bore |
r2 |
min.0.6 mm
|
Chamfer dimension outer ring |
Abutment dimensions
da |
min.22.7 mm
|
Abutment diameter shaft |
da |
max.25.2 mm
|
Abutment diameter shaft |
Da |
min.36.9 mm
|
Abutment diameter housing |
Da |
max.39.2 mm
|
Abutment diameter housing |
ra |
max.0.3 mm
|
Fillet radius shaft |
rb |
max.0.6 mm
|
Fillet radius housing |
Calculation data
Basic dynamic load rating |
C |
72 kN
|
Basic static load rating |
C0 |
240 kN
|
Specific dynamic load factor |
K |
150 N/mm²
|
Specific static load factor |
K0 |
500 N/mm²
|
Material constant |
KM |
330
|