PBM 10012080 M1G1
Solid bronze straight bushing
SKF solid bronze straight (cylindrical) bushings are suitable for oscillating, rotating and linear movements, and can accommodate radial loads.
They are designed for a wide variety of operating conditions and applications in tough environments.
- Insensitive to dirty environments
- Resistant to impact loads and vibrations at low speeds
- Operate with lower quality shaft finish
- Good corrosion resistance
Dimensions
d |
100 mm
|
Bore diameter |
D |
120 mm
|
Outside diameter |
B |
80 mm
|
Width |
a |
4 mm
|
Distance side face – axial lubrication groove |
h |
101.5 mm
|
Distance bottom axial lubrication groove – opposite bore diameter |
α |
124 °
|
Aperture angle axial lubrication groove |
Recommended fits
Tolerance shaft |
e7
|
Tolerance housing |
H7
|
Calculation data
Specific dynamic load factor |
K |
25 N/mm²
|
Specific static load factor |
K0 |
45 N/mm²
|
Permissible sliding velocity |
v |
max.0.5 m/s
|
Coefficient of friction |
µ |
min.0.08
|
Coefficient of friction |
µ |
max.0.15
|