Description
Properties
| Accessory type | Locating ring |
(72X80X10.5) (FRB10.5/80) (FRB10.5-80) (FRB80/10.5) (FRB80-10.5)
FRB 10.5/80
Locating (stabilizing) ring
A bearing in the locating position must be secured axially in the housing.
If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating ring is required, it should be installed on the same side as the lock nut.
Dimensions
| D |
80 mm
|
Outside diameter |
|---|---|---|
| d |
72 mm
|
Inside diameter |
| A |
10.5 mm
|
Width |
Additional information
| Weight | 0.0411 kg |
|---|---|
| Size (mm) | |
| Colour |
Related products
-
TSO 226 A
-
SNL 519-616/MS2
-
UCP 206-18 (Y/UCP 206-18, UCP 206-102)
-
UCP 205-15 (Y/UCP 205-15, UCP 205-015)
