YET 205
Insert bearing with an eccentric locking collar and narrow inner ring
Insert bearings are based on sealed deep groove ball bearings.
This variant is intended for use in applications where the direction of rotation is constant. It has a narrow inner ring extended on one side, with an eccentric locking collar, enabling quick and easy mounting onto the shaft.
- Designed for rotation in one direction
- Quick and easy to mount onto the shaft
- Long service life
- Reduce noise and vibration levels
Dimensions
d |
25 mm
|
Bore diameter |
D |
52 mm
|
Outside diameter |
B1 |
31 mm
|
Overall bearing width |
B |
21.5 mm
|
Width of inner ring |
C |
15 mm
|
Width of outer ring |
d1 |
≈33.74 mm
|
Outside diameter of inner ring |
d2 |
37.4 mm
|
Outside diameter of locking collar |
B4 |
4.75 mm
|
Distance from side face to thread centre |
r1,2 |
min.0.6 mm
|
Chamfer dimension of inner ring |
s1 |
23.5 mm
|
Distance from locking device side face to raceway centre |
Calculation data
Basic dynamic load rating |
C |
14 kN
|
Basic static load rating |
C0 |
7.8 kN
|
Fatigue load limit |
Pu |
0.335 kN
|
Limiting speed |
|
7 000 r/min
|
|
|
Limiting speed with shaft tolerance h6
|
Calculation factor |
f0 |
14
|
Mounting information
Set screw |
G2 |
M6x0.75
|
Hexagonal key size for set screw |
N |
3 mm
|
Recommended tightening torque for set screw |
|
4 N·m
|