UCT 216 (Y/UCT 216)

Take-up cast iron unit with insert ball bearing, set screw locking and extended inner ring, JIS

Take-up ball bearing units, consisting of an insert bearing based on a sealed deep groove ball bearing mounted in a grey cast iron housing.

Typically mounted in take-up frames, the unit has an inner ring extended on both sides and is locked by tightening two set screws on the inner ring, which makes it easy to mount. Units with designation suffix /H feature a 120° angle of separation between the set screws that contributes to a higher stability and a better load balance.

  • Designed for an alternating rotation
  • Quick and easy to mount onto the shaft
  • Accommodate static initial misalignment
  • Long service life
  • Reduced noise and vibration levels

Dimensions

d
80 mm
Bore diameter
d1
98.5 mm
Shoulder diameter of inner ring
A
70 mm
Overall width
A1
26 mm
Width of piloting groove
A2
51 mm
Width of flange in which piloting grooves are provided
B
82.6 mm
Width of inner ring
B4
14 mm
Distance from locking device side face to thread centre
H
184 mm
Overall height
H1
165 mm
Distance between bottoms of piloting grooves
H2
111 mm
Height of attachment end
L
235 mm
Overall length
L1
140 mm
Distance from attachment end face to centre line of spherical seat diameter
L2
21 mm
Length attachment end
L3
121 mm
Length of piloting groove
N
41 mm
Diameter of attachment bolt hole
N1
32 mm
Length of attachment slot
N2
70 mm
Height of attachment slot
s1
49.3 mm
Distance from locking device side face to raceway centre
THREADED HOLE
RG
1/8-27 NPT
Housing thread for the grease fitting
R1
5 mm
Axial position of the housing thread
Rα
30 °
Angular position of the housing thread
GREASE FITTING
DN
6.589 mm
Diameter of head sphere of grease fitting
SWN
11.11 mm
Hexagonal key size for the grease fitting
GN
1/8-27 NPT
Thread of grease fitting

Calculation data

Basic dynamic load rating C
71.5 kN
Basic static load rating C0
54 kN
Fatigue load limit Pu
2.2 kN
Limiting speed
1 900 r/min
Limiting speed with shaft tolerance h6

Mounting information

Set screw G2
M12x1.5
Hexagonal key size for set screw
6.08 mm
Recommended tightening torque for set screw
28.5 N·m
SKU: UCT 216-SKF Categories: ,

Properties

Housing type Take-up
Retaining feature, inner ring Set screws
Bore type Cylindrical
Rubber seating ring Without
Material, housing Cast iron
Material, bearing Bearing steel
Coating Without
Sealing, bearing Seal and flinger on both sides
Sealing type Contact, standard
Sealing, unit Without
Lubricant Grease
Relubrication hole With
Grease fitting With
Compliance with standard
JIS
Purpose specific
For material handling applications
Material, housing
Cast iron
Sealing, bearing
Seal and flinger on both sides
Sealing type, bearing
Contact, standard
Sealing, unit
Without
Coating
Without

Logistics

Product net weight 8.18 kg
eClass code 23-05-16-02
UNSPSC code 31171536

(UCT216) (Y/UCT216)

Additional information

Weight 8.18 kg
Colour

You may also like…