UCP 215 (Y/UCP 215)

Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards

Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface.

This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.

  • Strong
  • Designed for a constant and alternating rotation
  • Ready to mount
  • Lubricated and sealed bearing
  • Quick locking onto the shaft
  • Cost-effective

Dimensions

d
75 mm
Bore diameter
d1
91.5 mm
Shoulder diameter of inner ring
A
73 mm
Base width
A1
42 mm
Top width
B
77.8 mm
Width of inner ring
B4
11 mm
Distance from locking device side face to thread centre
H
82.6 mm
Height of spherical seat centre
H1
25.5 mm
Foot height
H2
164 mm
Overall height
J
217 mm
Distance between attachment bolts
J
max.222 mm
Distance between attachment bolts
J
min.212 mm
Distance between attachment bolts
L
271.5 mm
Overall length
N
25 mm
Diameter of attachment bolt hole
N1
30 mm
Length of attachment bolt hole
s1
44.5 mm
Distance from locking device side face to raceway centre
THREADED HOLE
RG
1/8-27 NPT
Housing thread for the grease fitting
R1
5 mm
Axial position of the housing thread
Rα
45 °
Angular position of the housing thread
GREASE FITTING
DN
6.589 mm
Diameter of head sphere of grease fitting
SWN
11.11 mm
Hexagonal key size for the grease fitting
GN
1/8-27 NPT
Thread of grease fitting

Calculation data

Basic dynamic load rating C
66.3 kN
Basic static load rating C0
49 kN
Fatigue load limit Pu
2.04 kN
Limiting speed
2 100 r/min
Limiting speed with shaft tolerance h6

Mounting information

Set screw G2
M12x1.5
Hexagonal key size for set screw
6.08 mm
Recommended tightening torque for set screw
28.5 N·m
Recommended diameter for attachment bolts, mm G
20 mm
Recommended diameter for attachment bolts, inch G
0.75 in

Properties

Housing type Pillow block
Number of bolt holes for fasteners 2
Fastening bolt hole type Plain
Retaining feature, inner ring Set screws
Bore type Cylindrical
Rubber seating ring Without
Material, housing Cast iron
Material, bearing Bearing steel
Coating Without
Sealing, bearing Seal and flinger on both sides
Sealing type Contact, standard
Sealing, unit Without
Lubricant Grease
Relubrication hole With
Grease fitting With
Compliance with standard
JIS
Purpose specific
For material handling applications
Material, housing
Cast iron
Sealing, bearing
Seal and flinger on both sides
Sealing type, bearing
Contact, standard
Sealing, unit
Without
Coating
Without

Logistics

Product net weight 7.46 kg
eClass code 23-05-16-02
UNSPSC code 31171536

(UCP215) (Y/UCP215)

Additional information

Weight 7.46 kg
Colour

You may also like…