WSTUC 35M-TPZM

Take-up composite unit with insert ball bearing, set screw locking and extended inner ring, not standardized, SKF Food Line

Take-up ball bearing units for the SKF Food Line consisting of an insert bearing based on a sealed deep groove ball bearing mounted in a composite housing.

They are strong, yet lightweight, and chemically resistant to detergents and contaminants. Typically mounted in take-up frames, the unit has an inner ring extended on both sides and is locked by tightening a set screw on the inner ring, that makes it easy to mount.

  • Strong, yet lightweight
  • Chemically resistant
  • Designed for an alternating rotation
  • Well suited to follow the highest food safety standards
  • Reliable in wet environments

Dimensions

d
35 mm
Bore diameter
d1
46.1 mm
Shoulder diameter of inner ring
Dc
82 mm
Centring diameter
Ha
6 mm
Groove height for backseal
A
39 mm
Overall width
A1
12 mm
Width of piloting groove
A2
30 mm
Width of flange in which piloting grooves are provided
A5
67.6 mm
Standout of end cover
B
42.9 mm
Width of inner ring
B4
6 mm
Distance from locking device side face to thread centre
H
103 mm
Overall height
H1
88.8 mm
Distance between bottoms of piloting grooves
H2
40 mm
Height of attachment end
L
122 mm
Overall length
L1
76 mm
Distance from attachment end face to centre line of spherical seat diameter
L3
63 mm
Length of piloting groove
G
M16
Thread size attachment end
G1
24 mm
Thread length
s1
25.4 mm
Distance from locking device side face to raceway centre

Calculation data

Basic dynamic load rating C
25.5 kN
Basic static load rating C0
15.3 kN
Fatigue load limit Pu
0.655 kN
Limiting speed
3 200 r/min
Limiting speed with shaft tolerance h6

Mounting information

Set screw G2
M6x0.75
Hexagonal key size for set screw
3 mm
Recommended tightening torque for set screw
4 N·m

Properties

Housing type Take-up
Retaining feature, inner ring Set screws
Bore type Cylindrical
Rubber seating ring Without
Material, housing Composite for the SKF Food Line
Material, bearing Bearing steel
Coating Zinc-coated bearing
Sealing, bearing Seal and flinger on both sides
Sealing type Contact, gutter
Sealing, unit Optional end cover
Lubricant Grease
Relubrication hole Without
Grease fitting Without
Compliance with standard
Not standardized
Purpose specific
For food and beverage applications
Material, housing
Composite for the SKF Food Line
Sealing, bearing
Seal and flinger on both sides
Sealing type, bearing
Contact, gutter
Sealing, unit
Optional end cover
Coating
Zinc-coated bearing

Logistics

Product net weight 0.628 kg
eClass code 23-05-08-02
UNSPSC code 31171536

Component

Insert bearing with set screw locking and extended inner ring YAR 207-2LPW/ZM

Recommended product

End cover for bearing units ECB 507

(WSTUC35M-TPZM) (WSTUC-35M-TPZM)

Additional information

Weight 0.628 kg
Colour

You may also like…