WSTUC 104-CPSS-DFH

Take-up composite unit with insert ball bearing, set screw locking and narrow inner ring, not standardized, SKF Food Line

Take-up ball bearing units for the SKF Food Line, consisting of an insert bearing based on a sealed deep groove ball bearing mounted in a composite housing.

They are strong, yet lightweight, and chemically resistant to detergents and contaminants. This variant is intended for use in applications where the direction of rotation is alternating. It has an inner ring extended on one side and is locked by tightening a set screw on the inner ring, which makes it easy to mount.

  • Strong, yet lightweight
  • Chemically resistant
  • Designed for an alternating rotation
  • Well suited to follow the highest food safety standards
  • Reliable in wet environments

Dimensions

d
31.75 mm
 Bore diameter
A
39 mm
 Overall width
A1
12 mm
 Width of piloting groove
A2
30 mm
 Width of flange in which piloting grooves are provided
A5
67.6 mm
 Standout of end cover
B
34.9 mm
 Width of inner ring
B4
6 mm
 Distance from locking device side face to thread centre
H
103 mm
 Overall height
H1
88.8 mm
 Distance between bottoms of piloting grooves
H2
40 mm
 Height of attachment end
L
122 mm
 Overall length
L1
76 mm
 Distance from attachment end face to centre line of spherical seat diameter
L3
63 mm
 Length of piloting groove
G
3/4-10 UNC
 Thread size attachment end
G1
21 mm
 Thread length
s1
25.4 mm
 Distance from locking device side face to raceway centre

Calculation data

Basic dynamic load rating C
21.6 kN
Basic static load rating C0
15.3 kN
Fatigue load limit Pu
0.655 kN
Limiting speed
500 r/min

Mounting information

Set screw G2
5/16-24 UNF
Hexagonal key size for set screw
3.969 mm
Recommended tightening torque for set screw
6.5 N·m
Add to Enquiry
SKU: WSTUC 104-CPSS-DFH-SKF Categories: , , ,
SKF

Description

Properties

Housing type Take-up
Retaining feature, inner ring Set screws
Bore type Cylindrical
Rubber seating ring Without
Material, housing Composite for the SKF Food Line
Material, bearing Stainless steel
Coating Without
Sealing, bearing Seal on both sides and flinger on one side
Sealing type Contact, gutter
Sealing, unit End cover and back seal
Lubricant Grease
Relubrication hole Without
Grease fitting Without
Compliance with standard
Not standardized
Purpose specific
For food and beverage applications
Material, housing
Composite for the SKF Food Line
Sealing, bearing
Seal on both sides and flinger on one side
Sealing type, bearing
Contact, gutter
Sealing, unit
End cover and back seal
Coating
Without

Logistics

Product net weight 0.767 kg
eClass code 23-05-08-02
UNSPSC code 31171536

Component

End cover for bearing units ECB 507

(WSTUC104-CPSS-DFH) (WSTUC-104-CPSS-DFH)

Additional information

Weight 0.767 kg
Colour

Related products

You may also like…