W 623 R-2Z

Stainless steel single row deep groove ball bearings with flanged outer ring and shields on both sides provide greater chemical and corrosion resistance.

As with deep groove ball bearings generally, they are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types. The flanged outer ring facilitates axial location of the bearings within their housings. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.

• Greater chemical and corrosion resistance
• Flanged outer ring facilitates axial location of the bearings within their housings
• Integral sealing prolongs bearing service life
• Typical benefits of single row deep groove ball bearings

Dimensions

d	3 mm	Bore diameter
D	10 mm	Outside diameter
B	4 mm	Width
d2	≈4.35 mm	Recess diameter
D2	≈7.98 mm	Recess diameter
D3	11.5 mm	Flange diameter
C	1 mm	Flange width
r1,2	min.0.15 mm	Chamfer dimension

Abutment dimensions

da	min.3.9 mm	Diameter of shaft abutment
da	max.4.3 mm	Diameter of shaft abutment
ra	max.0.15 mm	Radius of shaft or housing fillet

Calculation data

Basic dynamic load rating	C	0.358 kN
Basic static load rating	C0	0.11 kN
Fatigue load limit	Pu	0.005 kN
Reference speed		140 000 r/min
Limiting speed		70 000 r/min
Minimum load factor	kr	0.03
Calculation factor	f0	6.3

Tolerance class

Dimensional tolerances	Normal
Radial run-out	Normal