W 609-2Z
Stainless steel deep groove ball bearing with integral shields
Stainless steel single row deep groove ball bearing with shields on both sides, provide greater chemical and corrosion resistance.
As with deep groove ball bearings generally, they are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
- Greater chemical and corrosion resistance
- Integral sealing prolongs bearing service life
- Typical benefits of single row deep groove ball bearings
Dimensions
d |
9 mm
|
Bore diameter |
D |
24 mm
|
Outside diameter |
B |
7 mm
|
Width |
d2 |
≈12.1 mm
|
Recess diameter |
D2 |
≈20.48 mm
|
Recess diameter |
r1,2 |
min.0.3 mm
|
Chamfer dimension |
Abutment dimensions
da |
min.11 mm
|
Diameter of shaft abutment |
da |
max.12 mm
|
Diameter of shaft abutment |
Da |
max.22 mm
|
Diameter of housing abutment |
ra |
max.0.3 mm
|
Radius of shaft or housing fillet |
Calculation data
Basic dynamic load rating |
C |
2.03 kN
|
Basic static load rating |
C0 |
0.815 kN
|
Fatigue load limit |
Pu |
0.036 kN
|
Reference speed |
|
70 000 r/min
|
Limiting speed |
|
36 000 r/min
|
Minimum load factor |
kr |
0.03
|
Calculation factor |
f0 |
7.5
|
Tolerance class
Dimensional tolerances |
Normal
|
Radial run-out |
Normal
|