TU 55 TF

Take-up cast iron unit with insert ball bearing, set screw locking and extended inner ring, ISO

Take-up ball bearing units, consisting of an insert bearing based on a sealed deep groove ball bearing mounted in a grey cast iron housing.

Typically mounted in take-up frames, the unit has an inner ring extended on both sides and is locked by tightening a set screw on the inner ring, which makes it easy to mount.

  • Designed for an alternating rotation
  • Quick and easy to mount onto the shaft
  • Accommodate static initial misalignment
  • Long service life
  • Reduced noise and vibration levels

Dimensions

d
55 mm
Bore diameter
d1
69.06 mm
Shoulder diameter of inner ring
A
64 mm
Overall width
A1
27 mm
Width of piloting groove
A2
41 mm
Width of flange in which piloting grooves are provided
A5
33.5 mm
Standout of end cover
B
55.6 mm
Width of inner ring
B4
9 mm
Distance from locking device side face to thread centre
H
146 mm
Overall height
H1
130 mm
Distance between bottoms of piloting grooves
H2
102 mm
Height of attachment end
L
171 mm
Overall length
L1
106 mm
Distance from attachment end face to centre line of spherical seat diameter
L2
19 mm
Length attachment end
L3
95 mm
Length of piloting groove
N
35 mm
Diameter of attachment bolt hole
N1
25 mm
Length of attachment slot
N2
64 mm
Height of attachment slot
s1
33.4 mm
Distance from locking device side face to raceway centre
THREADED HOLE
RG
1/4-28 UNF
Housing thread for the grease fitting
R1
5 mm
Axial position of the housing thread
Rα
30 °
Angular position of the housing thread
GREASE FITTING
DN
6.5 mm
Diameter of head sphere of grease fitting
SWN
7 mm
Hexagonal key size for the grease fitting
GN
1/4-28 SAE-LT
Thread of grease fitting

Calculation data

Basic dynamic load rating C
43.6 kN
Basic static load rating C0
29 kN
Fatigue load limit Pu
1.25 kN
Limiting speed
3 600 r/min
Limiting speed with shaft tolerance h6

Mounting information

Set screw G2
M10x1
Hexagonal key size for set screw
5 mm
Recommended tightening torque for set screw
16.5 N·m

Properties

Housing type Take-up
Retaining feature, inner ring Set screws
Bore type Cylindrical
Rubber seating ring Without
Material, housing Cast iron
Material, bearing Bearing steel
Coating Without
Sealing, bearing Seal and flinger on both sides
Sealing type Contact, standard
Sealing, unit Optional end cover
Lubricant Grease
Relubrication hole With
Grease fitting With
Compliance with standard
ISO
Purpose specific
For material handling applications
Material, housing
Cast iron
Sealing, bearing
Seal and flinger on both sides
Sealing type, bearing
Contact, standard
Sealing, unit
Optional end cover
Coating
Without

Logistics

Product net weight 3.85 kg
eClass code 23-05-08-02
UNSPSC code 31171536

Component

Take-up cast iron housing for insert bearing, ISO TU 511 M
Insert bearing with set screw locking and extended inner ring YAR 211-2F

Recommended product

End cover for bearing units ECY 211

Additional information

Weight 3.85 kg
Size (mm)

Colour

You may also like…