TIH L77MB/LV
SKF Induction Heater TIH L77MB (230V version)
Extra-large induction heater for workpieces up to 600 kg
The SKF TIH L77MB is a very large induction heater and designed for the fast heating of heavy components such as rings, gears, couplings or similar ring-shaped metal workpieces. The TIH L77MB is characterised by its extended operating area that allows very large workpiece to be heated around the coil. The sliding yoke supports an ergonomic workflow and the heater can easily be transported by forklift. The TIH L77MB can heat large components weighing up to 600 kg.
- Standard sliding yoke for ergonomic operation
- Easy and safe to use with automatic temperature control or time controlled heating
- Automatic demagnetization reduces risk of bearing contamination
- Automatic temperature hold function to keep the bearing hot after completion of the heating cycle
TECHNICAL DATA
| Designation |
|
TIH L77MB |
| Maximum workpiece weight |
|
600 kg (1 323 lb) |
| Bore diameter range |
|
150–800 mm (5.9–31.5 in.) |
| Operating area (w × h) |
|
765 × 792 mm (30.1 × 31.2 in.) |
| Coil diameter |
|
175 mm (6.9 in.) |
| Standard yokes (included) to suit workpiece minimum bore diameter |
|
150 mm (5.9 in.) |
| Max. power consumption |
TIH L77MB/LV |
20–24 kVA |
| TIH L77MB/MV |
20–23 kVA |
| Voltage * |
TIH L77MB/LV |
200–240 V/50–60 Hz |
| TIH L77MB/MV |
400–460 V/50–60 Hz |
| Temperature control |
|
0–250 °C (32–482 °F); in steps of 1° |
| Time control |
|
0–120 minutes; in steps of 0,1 minute |
| Demagnetization according to SKF norms |
|
<2A/cm |
| Maximum heating temperature ** |
|
250 °C (482 °F) |
| Dimensions (w × d × h) |
|
1 320 × 600 × 1 150 mm (52 × 23.6 × 45.3 in.) |
| Weight |
|
415 kg (915 lb) |
