SYNT 45 LTS
Pillow block roller bearing unit, two-bolt, SKF ConCentra locking
Pillow (plummer) block roller bearing units and take-up roller bearing units consist of a spherical or tapered roller bearing mounted in a non-split housing that can be bolted to a support surface.
This variant has a spherical roller bearing, a two-bolt base and SKF ConCentra locking, creating a true concentric tight fit, and setting the correct internal clearance within the bearing. The units are sealed and lubricated and ready to use. This bearing unit covers a wide range of requirements, in metric dimensions.
- Ready to mount
- Robust
- Factory lubricated and sealed
- Quick mounting
- Long service life
Dimensions
| da |
45 mm
|
Shaft diameter |
| d2 |
71 mm
|
Collar outer diameter |
| A |
60 mm
|
Housing foot width |
| B |
65 mm
|
Inner ring width |
| H |
60 mm
|
Height base to center |
| H1 |
25 mm
|
Housing foot height |
| H2 |
118 mm
|
Housing height |
| J |
170 mm
|
Distance of attachment bolts |
| L |
205 mm
|
Housing length |
| N |
15 mm
|
Width foot slot width |
| N1 |
20 mm
|
Length of attachment bolt hole |
| S |
2.5 mm
|
Axial displacement |
SHAFT END
| A4 |
52 mm
|
Distance bearing centre line to end cover |
| ba |
max.43 mm
|
Distance bearing centre line to shaft end |
| ba |
min.34 mm
|
Distance bearing centre line to shaft end |
DOWEL PINS
| J6 |
185 mm
|
Distance dowel pins |
| J7 |
21 mm
|
Distance dowel pins |
| N4 |
6 mm
|
Pin hole diameter |
Calculation data
| Basic dynamic load rating |
C |
102 kN
|
| Basic static load rating |
C0 |
98 kN
|
| Fatigue load limit |
Pu |
10.8 kN
|
| Limiting speed |
|
5 400 r/min
|
| Limiting value |
e |
0.26
|
| Calculation factor |
Y1 |
2.6
|
| Calculation factor |
Y2 |
3.9
|
| Calculation factor |
Y0 |
2.5
|
| Bearing mean diameter |
dm |
65 mm
|
| Axial holding force of the locking mechanism |
Pa |
15 kN
|
Breaking loads
| P0° |
170 kN
|
Breaking load |
| P55° |
280 kN
|
Breaking load |
| P90° |
170 kN
|
Breaking load |
| P120° |
110 kN
|
Breaking load |
| P150° |
100 kN
|
Breaking load |
| P180° |
115 kN
|
Breaking load |
Mounting information
| Attachment bolt diameter |
G |
12 mm
|
| Tightening torque for attachment bolts |
|
80 N·m
|
| Set screws |
|
M6
|
| Number of set screws |
|
3
|
| Tightening torque for set screws |
|
8 N·m
|
| Grease quantity for relubrication |
|
4 g
|
