SYK 40 TR

Pillow block ball bearing unit with extended inner ring and set screw locking, composite, ISO standards

Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a composite housing that is lightweight but robust and has excellent corrosion resistance.

This variant is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.

  • Designed for a constant and alternating rotation
  • Excellent corrosion resistance
  • Lightweight
  • Recyclable

Dimensions

d
40 mm
Bore diameter
d1
51.8 mm
Shoulder diameter of inner ring
A
48 mm
Base width
A1
30 mm
Top width
A5
25.5 mm
Width including end cover
B
49.2 mm
Width of inner ring
B1
49.2 mm
Overall bearing width
B4
8 mm
Distance from locking device side face to thread centre
H
49.2 mm
Height of spherical seat centre
H1
19 mm
Foot height
H2
99.5 mm
Overall height
J
136 mm
Distance between attachment bolts
J
max.143 mm
Distance between attachment bolts
J
min.129 mm
Distance between attachment bolts
L
176 mm
Overall length
N
14.5 mm
Diameter of attachment bolt hole
N1
21.5 mm
Length of attachment bolt hole
s1
30.2 mm
Distance from locking device side face to raceway centre

Calculation data

Basic dynamic load rating C
30.7 kN
Basic static load rating C0
19 kN
Fatigue load limit Pu
0.8 kN
Limiting speed
2 800 r/min
Limiting speed with shaft tolerance h6

Mounting information

Set screw G2
M8x1
Hexagonal key size for set screw
4 mm
Recommended tightening torque for set screw
6.5 N·m
Recommended diameter for attachment bolts, mm G
12 mm
Recommended diameter for attachment bolts, inch G
0.5 in

Properties

Housing type Pillow block
Number of bolt holes for fasteners 2
Fastening bolt hole type Plain
Retaining feature, inner ring Set screws
Bore type Cylindrical
Rubber seating ring Without
Material, housing Composite
Material, bearing Bearing steel
Coating Without
Sealing, bearing Seal and flinger on both sides
Sealing type Contact, multiple
Sealing, unit Optional end cover
Lubricant Grease
Relubrication hole Without
Grease fitting Without
Compliance with standard
ISO
Purpose specific
For agricultural applications
Material, housing
Composite
Sealing, bearing
Seal and flinger on both sides
Sealing type, bearing
Contact, multiple
Sealing, unit
Optional end cover
Coating
Without

Logistics

Product net weight 0.885 kg
eClass code 23-05-08-02
UNSPSC code 31171536

Component

Pillow block housing for insert bearings, composite, ISO standards SYK 508
Insert bearing with set screw locking and extended inner ring YAR 208-2RF

Recommended product

End cover for bearing units ECY 208

(40X176X54.2) (SYK40TR)

Additional information

Weight 0.885 kg
Size (mm)

Colour

You may also like…