SY 65 TF
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, ISO standards
Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface.
This variant is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.
- Strong
- Ready to mount
- Lubricated and sealed bearing
- Quick locking onto the shaft
- Cost-effective
Dimensions
| d |
65 mm
|
Bore diameter |
| d1 |
≈82.5 mm
|
Shoulder diameter of inner ring |
| A |
65 mm
|
Base width |
| A1 |
44 mm
|
Top width |
| A5 |
39 mm
|
Standout of end cover |
| B |
68.3 mm
|
Width of inner ring |
| B4 |
10 mm
|
Distance from locking device side face to thread centre |
| H |
76.2 mm
|
Height of spherical seat centre |
| H1 |
29 mm
|
Foot height |
| H2 |
150 mm
|
Overall height |
| J |
203 mm
|
Distance between attachment bolts |
| J |
max.216 mm
|
Distance between attachment bolts |
| J |
min.190 mm
|
Distance between attachment bolts |
| L |
258 mm
|
Overall length |
| N |
22 mm
|
Diameter of attachment bolt hole |
| N1 |
35 mm
|
Length of attachment bolt hole |
| s1 |
42.9 mm
|
Distance from locking device side face to raceway centre |
THREADED HOLE
| RG |
1/4-28 UNF
|
Housing thread for the grease fitting |
| R1 |
5.5 mm
|
Axial position of the housing thread |
| Rα |
45 °
|
Angular position of the housing thread |
GREASE FITTING
| DN |
6.5 mm
|
Diameter of head sphere of grease fitting |
| SWN |
7 mm
|
Hexagonal key size for the grease fitting |
| GN |
1/4-28 SAE-LT
|
Thread of grease fitting |
DOWEL PINS
| J6 |
238 mm
|
Distance of dowel pins |
| J7 |
22.5 mm
|
Axial offset of dowel pins |
| N4 |
4 mm
|
Recommended diameter for dowel pins |
Calculation data
| Basic dynamic load rating |
C |
57.2 kN
|
| Basic static load rating |
C0 |
40 kN
|
| Fatigue load limit |
Pu |
1.7 kN
|
| Limiting speed |
|
3 000 r/min
|
|
|
Limiting speed with shaft tolerance h6
|
Mounting information
| Set screw |
G2 |
M10x1
|
| Hexagonal key size for set screw |
|
5 mm
|
| Recommended tightening torque for set screw |
|
16.5 N·m
|
| Recommended diameter for attachment bolts, mm |
G |
20 mm
|
| Recommended diameter for attachment bolts, inch |
G |
0.75 in
|
