SY 1.1/4 FM

Pillow block ball bearing unit with narrow inner ring and eccentric locking collar, cast iron, ISO standards

Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface.

This variant is intended for use in applications where the direction of rotation is constant. It has a narrow inner ring and is locked onto the shaft by an eccentric locking collar, making it easy to mount.

  • Strong
  • Ready to mount
  • Lubricated and sealed bearing
  • Designed for rotation in one direction
  • Accommodate static initial misalignment

Dimensions

d
31.75 mm
Bore diameter
d1
46.1 mm
Shoulder diameter of inner ring
d2
51.1 mm
Outside diameter of locking ring
A
45 mm
Base width
A1
27 mm
Top width
A5
24.5 mm
Standout of end cover
B
25.4 mm
Width of inner ring
B1
38.9 mm
Overall bearing width
B4
6.75 mm
Distance from locking device side face to thread centre
H
47.6 mm
Height of spherical seat centre
H1
19 mm
Foot height
H2
93 mm
Overall height
J
126 mm
Distance between attachment bolts
J
max.133 mm
Distance between attachment bolts
J
min.119 mm
Distance between attachment bolts
L
160 mm
Overall length
N
14 mm
Diameter of attachment bolt hole
N1
21 mm
Length of attachment bolt hole
s1
29.4 mm
Distance from locking device side face to raceway centre
THREADED HOLE
RG
1/4-28 UNF
Housing thread for the grease fitting
R1
3 mm
Axial position of the housing thread
Rα
45 °
Angular position of the housing thread
GREASE FITTING
DN
6.5 mm
Diameter of head sphere of grease fitting
SWN
7 mm
Hexagonal key size for the grease fitting
GN
1/4-28 SAE-LT
Thread of grease fitting
DOWEL PINS
J6
146 mm
Distance of dowel pins
J7
15.5 mm
Axial offset of dowel pins
N4
4 mm
Recommended diameter for dowel pins

Calculation data

Basic dynamic load rating C
25.5 kN
Basic static load rating C0
15.3 kN
Fatigue load limit Pu
0.655 kN
Limiting speed
5 300 r/min
Limiting speed with shaft tolerance h6

Mounting information

Set screw G2
3/8-24 UNF
Hexagonal key size for set screw
4.763 mm
Recommended tightening torque for set screw
16.5 N·m
Recommended diameter for attachment bolts, mm G
12 mm
Recommended diameter for attachment bolts, inch G
0.5 in

Properties

Housing type Pillow block
Number of bolt holes for fasteners 2
Fastening bolt hole type Plain
Retaining feature, inner ring Eccentric collar
Bore type Cylindrical
Rubber seating ring Without
Material, housing Cast iron
Material, bearing Bearing steel
Coating Without
Sealing, bearing Seal on both sides
Sealing type Contact, standard
Sealing, unit Optional end cover
Lubricant Grease
Relubrication hole With
Grease fitting With
Compliance with standard
ISO
Purpose specific
For material handling applications
Material, housing
Cast iron
Sealing, bearing
Seal on both sides
Sealing type, bearing
Contact, standard
Sealing, unit
Optional end cover
Coating
Without

Logistics

Product net weight 1.49 kg
eClass code 23-05-08-02
UNSPSC code 31171536

Component

Pillow block housing for insert bearings, cast iron, ISO standards SY 507 M
Insert bearing with an eccentric locking collar and narrow inner ring YET 207-104

Recommended product

End cover for bearing units ECY 207

(31.75X160X51.9) (SY1-1/4FM)

Additional information

Weight 1.492 kg
Size (mm)

Colour

You may also like…