They enable the incorporated bearings to achieve maximum service life with less need for maintenance. Different housing variants and seal designs are available, making the use of tailored housings virtually unnecessary and enabling cost-effective bearing arrangements to be made.
| Da |
460 mm
|
Diameter of bearing seat |
|---|---|---|
|
G7
|
Tolerance class of bearing seat diameter | |
| Ca |
166 mm
|
Width of bearing seat |
| H1 |
280 mm
|
Centre height of bearing seat |
| Db |
281.6 mm
|
Bore diameter |
|---|---|---|
| A |
320 mm
|
Overall width |
| A1 |
280 mm
|
Foot width |
| G1 |
1/8-27 NPSF
|
Thread of relubrication holes |
| H |
551 mm
|
Overall height |
| H2 |
105 mm
|
Foot height |
| L |
790 mm
|
Overall length |
| J |
670 mm
|
Distance between attachment bolts |
| J1 |
160 mm
|
Axial distance between attachment bolts |
| N |
50 mm
|
Length of attachment bolt hole (radial) |
| N1 |
42 mm
|
Width of attachment bolt hole |
| s |
16 mm
|
Offset of bearing axis |
| A3 |
249 mm
|
Inside width |
|---|---|---|
| A4 |
11 mm
|
Width of seal groove |
| A5 |
5.5 mm
|
Width of labyrinth stage |
| A6 |
22 mm
|
Width of labyrinth |
| A7 |
304 mm
|
Width between seal grooves |
| Dc |
296.6 mm
|
Diameter of seal groove |
| Dd |
305.6 mm
|
Diameter of seal groove |
| J6 |
740 mm
|
Distance between dowel pins |
|---|---|---|
| N4 |
20 mm
|
Diameter of dowel pins |
| P0° |
4 000 kN
|
Breaking load at 0° load angle |
|---|---|---|
| P55° |
5 000 kN
|
Breaking load at 55° load angle |
| P90° |
2 400 kN
|
Breaking load at 90° load angle |
| P120° |
1 800 kN
|
Breaking load at 120° load angle |
| P150° |
1 600 kN
|
Breaking load at 150° load angle |
| P180° |
2 000 kN
|
Breaking load at 180° load angle |
| Pa |
1 300 kN
|
Breaking load, axial |
| Q120° |
2 860 kN
|
Load to reach yield point at 120° load angle |
|---|---|---|
| Q150° |
1 650 kN
|
Load to reach yield point at 150° load angle |
| Q180° |
1 430 kN
|
Load to reach yield point at 180° load angle |
| Housing material |
Cast iron
|
| Corrosion protection |
Paint – in accordance with ISO 12944-2, corrosivity category C2
|
| Recommended diameter of attachment bolts | G |
36 mm
|
|---|---|---|
| Recommended tightening torque for attachment bolts |
2 280 N·m
|
|
| Size of cap bolts |
M30x200
|
|
| Tightening torque for cap bolts |
400 N·m
|
|
| Size of eye bolt |
M24
|
|
| Initial grease fill, 20% |
2.9 kg
|
|
| Initial grease fill, 40% |
4.4 kg
|
| Grease fitting |
AH 1/8-27 PTF, M1 G 1/8
|
| Adapter |
LAPN 1/8
|
| Housing type | Plummer/pillow block |
| Housing configuration | Two-piece |
| Mounting arrangement | Through shaft/Shaft end |
| Number of bolt holes for fasteners | 4 |
| Material, housing | Cast iron |
| Bearing housing seal type | Without |
| Housing lubrication feature/possibility | Grease |
| Product net weight | 252 kg |
| eClass code | 23-05-17-01 |
| UNSPSC code | 31171519 |
(SNL3156G)
| Weight | 252 kg |
|---|---|
| Size (mm) | |
| Colour |
Petaling Jaya Motors Supply was established in 1966 providing Bearing and other industrial parts needs for various industries. Thus, in our partnership with you, we bring you our varied expertise garnered from the years of experience in these industries.
© 2025 Petaling Jaya Motors Supply Sdn Bhd (196601000054) (006532-X). All Rights Reserved.
