They enable the incorporated bearings to achieve maximum service life with less need for maintenance. Oil seals are supplied together with the housing as a unit.
| Da |
400 mm
|
Diameter of bearing seat |
|---|---|---|
|
G7
|
Tolerance class of bearing seat diameter | |
| Ca |
148 mm
|
Width of bearing seat |
| H1 |
240 mm
|
Centre height of bearing seat |
| A1 |
260 mm
|
Foot width |
|---|---|---|
| A2 |
300 mm
|
Width across oil seals |
| G2 |
M8
|
Thread for condition monitoring |
| H |
474 mm
|
Overall height |
| H2 |
95 mm
|
Foot height |
| L |
700 mm
|
Overall length |
| J |
600 mm
|
Distance between attachment bolts |
| J1 |
150 mm
|
Axial distance between attachment bolts |
| N |
42 mm
|
Length of attachment bolt hole (radial) |
| N1 |
35 mm
|
Width of attachment bolt hole |
| s |
12 mm
|
Offset of bearing axis |
| PG |
G 3/8
|
Oil inlet for oil bath lubrication |
|---|---|---|
| QG |
G 1/4
|
Oil inlet for circulating oil lubrication |
| RG |
G 1 1/4
|
Oil outlet |
| R1 |
280 mm
|
Distance between oil outlets |
| R2 |
40 mm
|
Distance from housing bottom to oil outlet |
| J6 |
650 mm
|
Distance between dowel pins |
|---|---|---|
| N4 |
20 mm
|
Diameter of dowel pins |
| P0° |
3 400 kN
|
Breaking load at 0° load angle |
|---|---|---|
| P55° |
4 200 kN
|
Breaking load at 55° load angle |
| P90° |
2 000 kN
|
Breaking load at 90° load angle |
| P120° |
1 500 kN
|
Breaking load at 120° load angle |
| P150° |
1 400 kN
|
Breaking load at 150° load angle |
| P180° |
1 700 kN
|
Breaking load at 180° load angle |
| Pa |
1 100 kN
|
Breaking load, axial |
| Q120° |
2 860 kN
|
Load to reach yield point at 120° load angle |
|---|---|---|
| Q150° |
1 650 kN
|
Load to reach yield point at 150° load angle |
| Q180° |
1 430 kN
|
Load to reach yield point at 180° load angle |
| Housing material |
Cast iron
|
| Corrosion protection |
Paint – in accordance with ISO 12944-2, corrosivity category C2
|
| Recommended diameter of attachment bolts | G |
30 mm
|
|---|---|---|
| Recommended tightening torque for attachment bolts |
1 310 N·m
|
|
| Size of cap bolts |
M30x180
|
|
| Tightening torque for cap bolts |
400 N·m
|
|
| Size of eye bolt |
M24
|
|
| Oil level, max. | h |
78 mm
|
| Oil level, min. | h |
68 mm
|
| Breather plug |
TSFT/N 3/8
|
| Housing type | Plummer/pillow block |
| Housing configuration | Two-piece |
| Mounting arrangement | Through shaft/Shaft end |
| Number of bolt holes for fasteners | 4 |
| Material, housing | Cast iron |
| Bearing housing seal type | Oil seal |
| Housing lubrication feature/possibility | Oil |
| Product net weight | 187 kg |
| eClass code | 23-05-17-01 |
| UNSPSC code | 31171519 |
(SNL3148TURT)
| Weight | 187 kg |
|---|---|
| Size (mm) | |
| Colour |
Petaling Jaya Motors Supply was established in 1966 providing Bearing and other industrial parts needs for various industries. Thus, in our partnership with you, we bring you our varied expertise garnered from the years of experience in these industries.
© 2026 Petaling Jaya Motors Supply Sdn Bhd (196601000054) (006532-X). All Rights Reserved.
