SALKAC 22 M
Rod end, requires maintenance, male thread
These SKF rod ends contain a spherical plain bearing with a steel/bronze sliding contact surface combination.
The bearing requires maintenance, sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. The male thread is available with a left- (prefix SAL) or right-hand thread.
- Suitable where lubricant starvation might occur
- Simple and ready-to-mount
- Easy to relubricate (sizes ≥ 6)
Dimensions
d |
22 mm
|
Bore diameter |
d2 |
max.55 mm
|
Diameter head |
B |
28 mm
|
Width inner ring |
G |
M 22×1.5
|
Thread |
C1 |
max.21 mm
|
Width head |
h |
84 mm
|
Height shank end face – centre rod end eye |
α |
15 °
|
Angle of tilt |
dk |
38.1 mm
|
Raceway diameter inner ring |
l1 |
min.48 mm
|
Length threat |
l2 |
max.114 mm
|
Length (height) housing |
r1 |
min.0.3 mm
|
Chamfer dimension bore |
Calculation data
Basic dynamic load rating |
C |
38 kN
|
Basic static load rating |
C0 |
39 kN
|
Specific dynamic load factor |
K |
50 N/mm²
|
Material constant |
KM |
330
|