S7020 ACD/HCP4ADBA

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings with seals

These matched sets of two super-precision, high-capacity, D design, single row angular contact ball bearings with seals are available in a variety of arrangements.

They are designed to accommodate heavy loads at relatively high speeds under low to moderate operating temperatures.

  • Very high running accuracy
  • Very high load carrying capacity
  • Non-contact seals
  • Integral sealing prolongs bearing service life

Dimensions

d
100 mm
 Bore diameter
D
150 mm
 Outside diameter
B
48 mm
 Width
d1
115.4 mm
 Shoulder diameter of inner ring (large side face)
D4
143.52 mm
 Recess diameter outer ring shoulder (small side face)
r1,2
min.1.5 mm
 Chamfer dimension
r3,4
min.1 mm
 Chamfer dimension
Abutment dimensions - S7020 ACD/HCP4ADBA

Abutment dimensions

da
min.107 mm
 Diameter of shaft abutment
da
max.114.8 mm
 Diameter of shaft abutment
Db
max.146 mm
 Diameter of housing abutment
ra
max.1.5 mm
 Radius of fillet
rb
max.1 mm
 Radius of fillet

Calculation data

Basic dynamic load rating C
127 kN
Basic static load rating C0
160 kN
Fatigue load limit Pu
4.5 kN
Attainable speed for grease lubrication
To be calculated: Single bearing (9500) x speed reduction factor (see table below)
Attainable speed for oil-air lubrication
To be calculated: Single bearing () x speed reduction factor (see table below)
Contact angle α
25 °
Ball diameter Dw
15.875 mm
Number of rows i
2
Number of balls (per bearing) z
22
Preload and stiffness (back-to-back, face-to-face)
Preload class
A
Preload G
500 N
Axial stiffness
300 N/µm
Correction factors for preload calculation
Correction factor dependent on bearing series and size f
1.16
Correction factor dependent on contact angle f1
0.99
Correction factor, preload class A f2A
1
Correction factor for hybrid bearings fHC
1.02
Factors for equivalent bearing load calculation
Axial load factor (back-to-back, face-to-face) Y1
0.92
Axial load factor (back-to-back, face-to-face) Y2
1.41
Axial load factor (back-to-back, face-to-face) Y0
0.76
Radial load factor (back-to-back, face-to-face) X1
1
Radial load factor (back-to-back, face-to-face) X2
0.67
Radial load factor (back-to-back, face-to-face) X0
1
Add to Enquiry
SKU: S7020 ACD/HCP4ADBA-SKF Categories: , , , ,
SKF

Description

Properties

Contact type Normal contact (two-point contact)
Number of rows 2
Ring type One-piece inner and outer rings
Design High-capacity D
Universal matching bearing No
Matched arrangement Back-to-back <>
Number of bearings in matched set 2
Matched condition (axial clearance/ preload) Extra light preload
Tolerance class P4A
Material, bearing Hybrid (ceramic balls)
Coating Without
Sealing Seal on both sides
Sealing type Non-contact
Lubricant Grease

Logistics

Product net weight 2.1 kg
eClass code 23-05-08-03
UNSPSC code 31171531

Aftermarket replacement

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings with seals S7020 ACD/HCP4ADGA
Super-precision, high-capacity, universally matchable single row angular contact ball bearing with seals 2 x S7020 ACDGA/HCP4A
Verify quantity of bearing rows

(100X150X48) (S7020ACDHCP4ADBA)

Additional information

Weight 2.1 kg
Size (mm)

Colour

Related products