S7018 ACD/P4ADBC

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings with seals

These matched sets of two super-precision, high-capacity, D design, single row angular contact ball bearings with seals are available in a variety of arrangements.

They are designed to accommodate heavy loads at relatively high speeds under low to moderate operating temperatures.

  • Very high running accuracy
  • Very high load carrying capacity
  • Non-contact seals
  • Integral sealing prolongs bearing service life

Dimensions

d
90 mm
 Bore diameter
D
140 mm
 Outside diameter
B
48 mm
 Width
d1
105.4 mm
 Shoulder diameter of inner ring (large side face)
D4
133.6 mm
 Recess diameter outer ring shoulder (small side face)
r1,2
min.1.5 mm
 Chamfer dimension
r3,4
min.1 mm
 Chamfer dimension
Abutment dimensions - S7018 ACD/P4ADBC

Abutment dimensions

da
min.97 mm
 Diameter of shaft abutment
da
max.104.8 mm
 Diameter of shaft abutment
Db
max.136 mm
 Diameter of housing abutment
ra
max.1.5 mm
 Radius of fillet
rb
max.1 mm
 Radius of fillet

Calculation data

Basic dynamic load rating C
121 kN
Basic static load rating C0
143 kN
Fatigue load limit Pu
5.7 kN
Attainable speed for grease lubrication
To be calculated: Single bearing (8500) x speed reduction factor (see table below)
Attainable speed for oil-air lubrication
To be calculated: Single bearing () x speed reduction factor (see table below)
Contact angle α
25 °
Ball diameter Dw
15.875 mm
Number of rows i
2
Number of balls (per bearing) z
20
Preload and stiffness (back-to-back, face-to-face)
Preload class
C
Preload G
1 840 N
Axial stiffness
425 N/µm
Correction factors for preload calculation
Correction factor dependent on bearing series and size f
1.14
Correction factor dependent on contact angle f1
0.99
Correction factor, preload class C f2C
1.05
Correction factor for hybrid bearings fHC
1
Factors for equivalent bearing load calculation
Axial load factor (back-to-back, face-to-face) Y1
0.92
Axial load factor (back-to-back, face-to-face) Y2
1.41
Axial load factor (back-to-back, face-to-face) Y0
0.76
Radial load factor (back-to-back, face-to-face) X1
1
Radial load factor (back-to-back, face-to-face) X2
0.67
Radial load factor (back-to-back, face-to-face) X0
1
Add to Enquiry
SKU: S7018 ACD/P4ADBC-SKF Categories: , , , ,
SKF

Description

Properties

Contact type Normal contact (two-point contact)
Number of rows 2
Ring type One-piece inner and outer rings
Design High-capacity D
Universal matching bearing No
Matched arrangement Back-to-back <>
Number of bearings in matched set 2
Matched condition (axial clearance/ preload) Moderate preload
Tolerance class P4A
Material, bearing Bearing steel
Coating Without
Sealing Seal on both sides
Sealing type Non-contact
Lubricant Grease

Logistics

Product net weight 2.33 kg
eClass code 23-05-08-04
UNSPSC code 31171531

Aftermarket replacement

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings with seals S7018 ACD/P4ADGC
Super-precision, high-capacity, universally matchable single row angular contact ball bearing with seals 2 x S7018 ACDGC/P4A
Verify quantity of bearing rows

(90X140X48) (S7018 ACDP4ADBC)

Additional information

Weight 2.33 kg
Size (mm)

Colour

Related products