S7012 CE/P4ADGA

Matched set of two super-precision, high-speed E design, single row angular contact ball bearings with seals

These matched sets of two super-precision, high-speed, E design, single row angular contact ball bearings with seals are available in a variety of arrangements.

Compared to the equivalent SKF B design high-speed bearings, these have a slightly higher speed capability and can accommodate heavier loads.

  • Very high running accuracy
  • Accommodate very high speeds
  • Non-contact seals
  • Integral sealing prolongs bearing service life

Dimensions

d
60 mm
 Bore diameter
D
95 mm
 Outside diameter
B
36 mm
 Width
d1
72.74 mm
 Shoulder diameter of inner ring (large side face)
d2
70.6 mm
 Shoulder diameter of inner ring (small side face)
D2
85.4 mm
 Recess diameter of outer ring (large side face)
D4
87.8 mm
 Recess diameter outer ring shoulder (small side face)
r1,2
min.1.1 mm
 Chamfer dimension
r3,4
min.0.6 mm
 Chamfer dimension
Abutment dimensions - S7012 CE/P4ADGA

Abutment dimensions

da
min.66 mm
 Diameter of shaft abutment
da
max.72.1 mm
 Diameter of shaft abutment
db
min.66 mm
 Diameter of shaft abutment
db
max.70 mm
 Diameter of shaft abutment
Da
max.89 mm
 Diameter of housing abutment
Db
max.90.8 mm
 Diameter of housing abutment
ra
max.1 mm
 Radius of fillet
rb
max.0.6 mm
 Radius of fillet

Calculation data

Basic dynamic load rating C
27.6 kN
Basic static load rating C0
25.5 kN
Fatigue load limit Pu
1.08 kN
Attainable speed for grease lubrication
To be calculated: Single bearing (20000) x speed reduction factor (see table below)
Attainable speed for oil-air lubrication
To be calculated: Single bearing () x speed reduction factor (see table below)
Contact angle α
15 °
Ball diameter Dw
7.938 mm
Number of rows i
2
Number of balls (per bearing) z
25
Preload and stiffness (back-to-back, face-to-face)
Preload class
A
Preload G
92 N
Axial stiffness
48 N/µm
Correction factors for preload calculation
Correction factor dependent on bearing series and size f
1.08
Correction factor dependent on contact angle f1
1
Correction factor, preload class A f2A
1
Correction factor for hybrid bearings fHC
1
Factors for equivalent bearing load calculation
Calculation factor for equivalent loads f0
8.5
Add to Enquiry
SKU: S7012 CE/P4ADGA-SKF Categories: , , , ,
SKF

Description

Properties

Contact type Normal contact (two-point contact)
Number of rows 2
Ring type One-piece inner and outer rings
Design High-speed E
Universal matching bearing Yes, back-to-back (<>), face-to-face (><) or tandem (>>)
Matched arrangement Universal matching
Number of bearings in matched set 2
Matched condition (axial clearance/ preload) Extra light preload
Tolerance class P4A
Material, bearing Bearing steel
Coating Without
Sealing Seal on both sides
Sealing type Non-contact
Lubricant Grease

Logistics

Product net weight 0.84 kg
eClass code 23-05-08-04
UNSPSC code 31171531

(60X95X36) (S7012CEP4ADGA)

Additional information

Weight 0.84 kg
Size (mm)

Colour

Related products