S7003 CD/P4ADBB

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings with seals

These matched sets of two super-precision, high-capacity, D design, single row angular contact ball bearings with seals are available in a variety of arrangements.

They are designed to accommodate heavy loads at relatively high speeds under low to moderate operating temperatures.

  • Very high running accuracy
  • Very high load carrying capacity
  • Non-contact seals
  • Integral sealing prolongs bearing service life

Dimensions

d
17 mm
 Bore diameter
D
35 mm
 Outside diameter
B
20 mm
 Width
d1
22.6 mm
 Shoulder diameter of inner ring (large side face)
D4
32.7 mm
 Recess diameter outer ring shoulder (small side face)
r1,2
min.0.3 mm
 Chamfer dimension
r3,4
min.0.2 mm
 Chamfer dimension
Abutment dimensions - S7003 CD/P4ADBB

Abutment dimensions

da
min.19 mm
 Diameter of shaft abutment
da
max.22.2 mm
 Diameter of shaft abutment
Db
max.33.6 mm
 Diameter of housing abutment
ra
max.0.3 mm
 Radius of fillet
rb
max.0.2 mm
 Radius of fillet

Calculation data

Basic dynamic load rating C
11.1 kN
Basic static load rating C0
6.55 kN
Fatigue load limit Pu
0.275 kN
Attainable speed for grease lubrication
To be calculated: Single bearing (50000) x speed reduction factor (see table below)
Attainable speed for oil-air lubrication
To be calculated: Single bearing () x speed reduction factor (see table below)
Contact angle α
15 °
Ball diameter Dw
5.556 mm
Number of rows i
2
Number of balls (per bearing) z
12
Preload and stiffness (back-to-back, face-to-face)
Preload class
B
Preload G
50 N
Axial stiffness
26 N/µm
Correction factors for preload calculation
Correction factor dependent on bearing series and size f
1.04
Correction factor dependent on contact angle f1
1
Correction factor, preload class B f2B
1.02
Correction factor for hybrid bearings fHC
1
Factors for equivalent bearing load calculation
Calculation factor for equivalent loads f0
9.1
Add to Enquiry
SKU: S7003 CD/P4ADBB-SKF Categories: , , , ,
SKF

Description

Properties

Contact type Normal contact (two-point contact)
Number of rows 2
Ring type One-piece inner and outer rings
Design High-capacity D
Universal matching bearing No
Matched arrangement Back-to-back <>
Number of bearings in matched set 2
Matched condition (axial clearance/ preload) Light preload
Tolerance class P4A
Material, bearing Bearing steel
Coating Without
Sealing Seal on both sides
Sealing type Non-contact
Lubricant Grease

Logistics

Product net weight 0.076 kg
eClass code 23-05-08-04
UNSPSC code 31171531

Aftermarket replacement

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings with seals S7003 CD/P4ADGB

(17X35X20) (S7003CDP4ADBB)

Additional information

Weight 0.076 kg
Size (mm)

Colour

Related products