PNA 15/32
Alignment needle roller bearing, with an inner ring
Alignment needle roller bearings are self-aligning and offer a compact solution in applications where less space is available.
Owing to their large number of rollers, they have a high load carrying capacity. Their internal design, where a convex outer ring meets two concave seating rings encased in a drawn sleeve, enables the bearings to compensate for initial errors of alignment. Bearings with an inner ring are used for applications where the shaft cannot be hardened and ground.
- High radial load carrying capacity
- Accommodate static initial misalignment
- Low cross-sectional height
Dimensions
| d |
15 mm
|
Bore diameter |
| D |
32 mm
|
Outside diameter |
| B |
16 mm
|
Width |
| F |
18 mm
|
Raceway diameter inner ring |
| D1 |
27 mm
|
Shoulder diameter sleeve |
| r |
min.0.8 mm
|
Chamfer dimension sheet steel sleeve |
| r1,2 |
min.0.3 mm
|
Chamfer dimension inner ring |
| s |
max.0.5 mm
|
Permissible axial displacement from the normal position of one bearing ring relative to the other |
Abutment dimensions
| da |
min.17 mm
|
Smallest permissible abutment diameter shaft |
| Da |
min.26 mm
|
Smallest permissible abutment diameter housing |
| Da |
max.27 mm
|
Largest permissible abutment diameter housing |
| ra |
max.0.8 mm
|
Fillet radius |
| rb |
max.0.3 mm
|
Fillet radius |
Calculation data
| Basic dynamic load rating |
C |
12.8 kN
|
| Basic static load rating |
C0 |
17.6 kN
|
| Fatigue load limit |
Pu |
2.12 kN
|
| Reference speed |
|
22 000 r/min
|
| Limiting speed |
|
24 000 r/min
|
