P2BTSS 25M-TPSS

Short base pillow block ball bearing unit with extended inner ring and set screw locking, stainless steel

Short base pillow (plummer) block ball bearing units consist of an insert bearing mounted in a stainless steel housing.

This variant has threads for attachment bolts and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.

  • Ready to mount
  • Lubricated and sealed bearing
  • Quick locking onto the shaft
  • Good corrosion resistance

Dimensions

d
25 mm
Bore diameter
d1
33.74 mm
Shoulder diameter of inner ring
Dc
62 mm
Centring diameter
Ha
6.2 mm
Groove height for backseal
A
27 mm
Base width
A1
37 mm
Top width
A5
63.6 mm
Width including end cover
B
34.1 mm
Width of inner ring
B4
5 mm
Distance from locking device side face to thread centre
H
36.5 mm
Height of spherical seat centre
H2
71.5 mm
Overall height
J
50.8 mm
Distance between attachment bolts
L
76.2 mm
Overall length
s1
19.8 mm
Distance from locking device side face to raceway centre

Calculation data

Basic dynamic load rating C
11.9 kN
Basic static load rating C0
7.8 kN
Fatigue load limit Pu
0.335 kN
Limiting speed
4 300 r/min
Limiting speed with shaft tolerance h6

Mounting information

Thread for attachment bolts G
M10
Thread length G1
13 mm
Set screw G2
M6x0.75
Hexagonal key size for set screw
3 mm
Recommended tightening torque for set screw
4 N·m
SKU: P2BTSS 25M-TPSS-SKF Categories: ,

Properties

Housing type Pillow block
Number of bolt holes for fasteners 2
Fastening bolt hole type Threaded
Retaining feature, inner ring Set screws
Bore type Cylindrical
Rubber seating ring Without
Material, housing Stainless steel
Material, bearing Stainless steel
Coating Without
Sealing, bearing Seal and flinger on both sides
Sealing type Contact, gutter
Sealing, unit Optional end cover
Lubricant Grease
Relubrication hole Without
Grease fitting Without
Compliance with standard
Not standardized
Purpose specific
For food and beverage applications
Material, housing
Stainless steel
Sealing, bearing
Seal and flinger on both sides
Sealing type, bearing
Contact, gutter
Sealing, unit
Optional end cover
Coating
Without

Logistics

Product net weight 0.6 kg
eClass code 23-05-08-02
UNSPSC code 31171536

Component

Insert bearing with set screw locking and extended inner ring YAR 205-2LPW/SS

Recommended product

End cover for bearing units ECB 505

(25X77X36) (SYFWR25YTHR) (P2BTSS25M-TPSS) (P2BTSS25MTPSS)

Additional information

Weight 0.6 kg
Size (mm)

Colour

You may also like…