NCF 3011 CV/C3
Single row full complement cylindrical roller bearing, NCF design
Single row full complement cylindrical roller bearings are designed to accommodate very high radial loads in combination with moderate speeds.
The bearings incorporate a maximum number of rollers as they are not equipped with a cage. Having two integral flanges on the inner ring and one flange on the outer ring, NCF design bearings can accommodate axial displacement in one direction. A retaining ring on the outer ring holds the bearing together. The retaining ring should not be loaded axially during operation.
- Very high radial load carrying capacity
- High radial stiffness
- Long service life
- Locate the shaft axially in one direction
Dimensions
| Bore diameter |
d |
55 mm
|
| Outside diameter |
D |
90 mm
|
| Width |
B |
26 mm
|
| Shoulder diameter inner ring |
d1 |
≈68 mm
|
| Shoulder diameter outer ring |
D1 |
≈79 mm
|
| Raceway diameter outer ring |
E |
83.54 mm
|
| Raceway diameter inner ring |
F |
63.54 mm
|
| Permissible axial displacement from the normal position of one bearing ring relative to the other |
s |
max.2 mm
|
| Chamfer dimension |
r1,2 |
min.1.1 mm
|
| Chamfer dimension |
r3,4 |
min.0.6 mm
|
|
|
Parameter r3.4 has either the value specified here or the same value as r1.2.
|
Abutment dimensions
| Abutment diameter shaft |
da |
min.62 mm
|
| Abutment diameter housing |
Da |
max.84 mm
|
| Fillet radius |
ra |
max.1 mm
|
| Fillet radius |
rb |
max.0.6 mm
|
Calculation data
| Basic dynamic load rating |
C |
105 kN
|
| Basic static load rating |
C0 |
140 kN
|
| Fatigue load limit |
Pu |
17.3 kN
|
| Reference speed |
|
3 400 r/min
|
| Limiting speed |
|
4 300 r/min
|
| Calculation factor |
kr |
0.3
|
| Limiting value |
e |
0.3
|
| Calculation factor |
Y |
0.4
|
