NATV 6
Support rollers (yoke-type track rollers) with flange rings and relubrication feature
Support rollers (yoke-type track rollers) are designed to run on all types of tracks and to be used in cam drives, conveyor systems, etc.
They are based on a needle roller bearing with an inner ring. They have a thick-walled outer ring with a crowned running surface and are supplied ready-to-mount. A narrow gap between the outer ring and the pressed-on flange rings forms a gap-type seal. The inner ring contains a lubrication hole to facilitate relubrication.
- High radial load carrying capacity
- Accommodate axial loads due to skew or tilting
- Long service life
- Ready to mount
- Sealed for increased reliability, with relubrication feature.
Dimensions
| D |
19 mm
|
Outside diameter |
| d |
6 mm
|
Bore diameter |
| C |
11 mm
|
Width outer ring |
| B |
12 mm
|
Width inner ring |
| d1 |
13.9 mm
|
Outside diameter flange ring |
Calculation data
| Basic dynamic load rating |
C |
4.73 kN
|
| Basic static load rating |
C0 |
7.35 kN
|
| Fatigue load limit |
Pu |
0.815 kN
|
| Maximum dynamic radial loads |
Fr |
max.4.75 kN
|
| Maximum static radial loads |
F0r |
max.6.8 kN
|
| Limiting speed |
|
3 800 r/min
|
