KR 80 X
Cam follower (stud-type track roller) with relubrication feature
Cam followers (stud-type track rollers) are designed to run on all types of tracks and to be used in cam drives, conveyor systems, etc.
They are based on a needle roller bearing with a threaded solid stud instead of an inner ring. They have a thick-walled outer ring with a crowned running surface and are supplied ready-to-mount. A narrow gap between the outer ring and the adjacent components forms a gap-type seal. The bearings can be relubricated via the stud.
- High radial load carrying capacity
- Accommodate axial loads due to skew or tilting
- Long service life
- Easy to mount
- Sealed for increased reliability, with relubrication feature
Dimensions
| D |
80 mm
|
Outside diameter |
| d |
30 mm
|
Attachment diameter |
| B |
100 mm
|
Total length |
| C |
35 mm
|
Width outer ring |
| B1 |
63 mm
|
Length shank on stud |
| B2 |
15 mm
|
Distance lubrication hole to flange ring |
| C1 |
1 mm
|
Distance face outer ring to face side washer |
| d1 |
50.9 mm
|
Outside diameter flange ring |
| G |
M30x1.5
|
Thread stud |
| G1 |
32 mm
|
Length thread |
| M |
6 mm
|
Seat diameter for lubrication accessories |
| M1 |
4 mm
|
Diameter of lubrication hole (shank) |
| SW |
14 mm
|
Width across flats |
| r1,2 |
min.1 mm
|
Chamfer dimension |
Calculation data
| Basic dynamic load rating |
C |
35.8 kN
|
| Basic static load rating |
C0 |
71 kN
|
| Fatigue load limit |
Pu |
8.8 kN
|
| Maximum dynamic radial loads |
Fr |
max.102 kN
|
| Maximum static radial loads |
F0r |
max.146 kN
|
| Limiting speed |
|
1 800 r/min
|
Mounting information
| Recommended tightening torque |
450 N·m
|
Included products
| Grease fitting |
NIP B2x8
|
| Hexagonal nut |
M 30×1.5
|
