GEZM 200 ES-2RS
Radial spherical plain bearing, requiring maintenance, sealed, inch sizes
Radial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment.
This specific design includes a steel/steel sliding contact surface combination, an extended inner ring and a double-lip contact seal on both sides. The bearings require maintenance and can be relubricated via lubrication holes and an annular groove in both rings.
- Designed for radial and combined radial and axial loads
- Long service life
- Minimal maintenance
- Suitable for heavy static, alternating or impact loads
- Extended inner ring can save spacer rings
Dimensions
d |
50.8 mm
|
Bore diameter |
D |
80.963 mm
|
Outside diameter |
B |
76.2 mm
|
Width |
C |
38.1 mm
|
Width outer ring |
α |
5 °
|
Angle of tilt |
dk |
73.025 mm
|
Raceway diameter inner ring |
d1 |
≈62.484 mm
|
Shoulder diameter cylindrical extension inner ring |
b |
4.4 mm
|
Width annular lubrication groove at outer ring |
b1 |
5 mm
|
Width annular lubrication groove at inner ring |
M |
4 mm
|
Diameter lubrication hole (outer ring) |
r1 |
min.1 mm
|
Chamfer dimension bore |
r2 |
min.1 mm
|
Chamfer dimension outer ring |
Abutment dimensions
da |
min.56.5 mm
|
Abutment diameter shaft |
da |
max.62.5 mm
|
Abutment diameter shaft |
Da |
min.72.4 mm
|
Abutment diameter housing |
Da |
max.75.9 mm
|
Abutment diameter housing |
ra |
max.1 mm
|
Fillet radius shaft |
rb |
max.1 mm
|
Fillet radius housing |
Calculation data
Basic dynamic load rating |
C |
224 kN
|
Basic static load rating |
C0 |
670 kN
|
Specific dynamic load factor |
K |
100 N/mm²
|
Specific static load factor |
K0 |
300 N/mm²
|
Material constant |
KM |
330
|