GEP 160 FS

GEP 160 FS

Radial spherical plain bearing, maintenance-free, metric sizes

These radial spherical plain bearings have a steel/PTFE FRP sliding contact surface combination.

They are factory greased and maintenance-free. However, relubrication can extend bearing service life and can be applied via lubrication holes and an annular groove in both rings. Compared to the GEC design (axially split outer ring), the GEP design (radially split) has a wider and larger outside diameter for a given shaft size. This results in a higher basic load rating, but a smaller tilt angle.

Designed for radial and combined radial and axial loads
Long service life and maintenance-free
Relatively insensitive to contaminants
Low coefficient of friction

Dimensions

d	160 mm	Bore diameter
D	230 mm	Outside diameter
B	115 mm	Width
C	109 mm	Width outer ring
α	2 °	Angle of tilt
d_k	210 mm	Raceway diameter inner ring
b	7.5 mm	Width annular lubrication groove at outer ring
b₁	7.5 mm	Width annular lubrication groove at inner ring
M	4 mm	Diameter lubrication hole (outer ring)
r₁	min.1 mm	Chamfer dimension bore
r₂	min.1 mm	Chamfer dimension outer ring

Abutment dimensions

d_a	min.169 mm	Abutment diameter shaft
d_a	max.175 mm	Abutment diameter shaft
D_a	min.195 mm	Abutment diameter housing
D_a	max.218 mm	Abutment diameter housing
r_a	max.1 mm	Fillet radius shaft
r_b	max.1 mm	Fillet radius housing

Calculation data

Basic dynamic load rating	C	1 600 kN
Basic static load rating	C₀	2 400 kN
Specific dynamic load factor	K	80 N/mm²
Specific static load factor	K₀	120 N/mm²
Material constant	K_M	1 055

Properties

Sliding contact surface combination	Steel/PTFE FRP
Material, inner ring	Bearing steel
Maintenance	Maintenance-free
Sealing	Without
Relubrication feature	With

Logistics

Product net weight	16.6 kg
eClass code	23-05-01-06
UNSPSC code	31171515

(GEP160FS) (160X230X115)

Additional information

Weight	16.6 kg
Size (mm)	160.000×230.000×115.000
Colour	BLUE