GEP 140 FS

GEP 140 FS

Radial spherical plain bearing, maintenance-free, metric sizes

These radial spherical plain bearings have a steel/PTFE FRP sliding contact surface combination.

They are factory greased and maintenance-free. However, relubrication can extend bearing service life and can be applied via lubrication holes and an annular groove in both rings. Compared to the GEC design (axially split outer ring), the GEP design (radially split) has a wider and larger outside diameter for a given shaft size. This results in a higher basic load rating, but a smaller tilt angle.

Designed for radial and combined radial and axial loads
Long service life and maintenance-free
Relatively insensitive to contaminants
Low coefficient of friction

Dimensions

d	140 mm	Bore diameter
D	210 mm	Outside diameter
B	100 mm	Width
C	95 mm	Width outer ring
α	2 °	Angle of tilt
d_k	185 mm	Raceway diameter inner ring
b	7.5 mm	Width annular lubrication groove at outer ring
b₁	7.5 mm	Width annular lubrication groove at inner ring
M	4 mm	Diameter lubrication hole (outer ring)
r₁	min.1 mm	Chamfer dimension bore
r₂	min.1 mm	Chamfer dimension outer ring

Abutment dimensions

d_a	min.148 mm	Abutment diameter shaft
d_a	max.155 mm	Abutment diameter shaft
D_a	min.173 mm	Abutment diameter housing
D_a	max.200 mm	Abutment diameter housing
r_a	max.1 mm	Fillet radius shaft
r_b	max.1 mm	Fillet radius housing

Calculation data

Basic dynamic load rating	C	1 200 kN
Basic static load rating	C₀	1 800 kN
Specific dynamic load factor	K	80 N/mm²
Specific static load factor	K₀	120 N/mm²
Material constant	K_M	1 055

Properties

Sliding contact surface combination	Steel/PTFE FRP
Material, inner ring	Bearing steel
Maintenance	Maintenance-free
Sealing	Without
Relubrication feature	With

Logistics

Product net weight	13 kg
eClass code	23-05-01-06
UNSPSC code	31171515

(GEP140FS) (140X210X100)

Additional information

Weight	13 kg
Size (mm)	140.000×210.000×100.000
Colour	BLUE