GEH 10 C

These spherical plain bearings have a steel/PTFE sintered bronze contact surface combination and are maintenance-free.

The sliding surfaces have to be externally protected from contaminants. These bearings are also available with a wider inner ring and a larger outside diameter (suffix GEH), which enable higher load ratings and larger tilt angles.

• Designed for radial and combined radial and axial loads
• Long service life and maintenance-free
• Suitable for heavy, constant direction loads
• Low coefficient of friction
• High operating temperatures
• High sliding velocities and small operating clearances

Dimensions

d	10 mm	Bore diameter
D	22 mm	Outside diameter
B	12 mm	Width
C	7 mm	Width outer ring
α	18 °	Angle of tilt
dk	18 mm	Raceway diameter inner ring
r1	min.0.3 mm	Chamfer dimension bore
r2	min.0.3 mm	Chamfer dimension outer ring

Abutment dimensions

da	min.11.6 mm	Abutment diameter shaft
da	max.13.4 mm	Abutment diameter shaft
Da	min.17.1 mm	Abutment diameter housing
Da	max.20.6 mm	Abutment diameter housing
ra	max.0.3 mm	Fillet radius shaft
rb	max.0.3 mm	Fillet radius housing

Calculation data

Basic dynamic load rating	C	11.4 kN
Basic static load rating	C0	28.5 kN
Specific dynamic load factor	K	100 N/mm²
Specific static load factor	K0	250 N/mm²
Material constant	KM	1 400