GE 140 ES-2RS

GE 140 ES-2RS

Radial spherical plain bearing, requiring maintenance, sealed, metric sizes

Radial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment.

This specific design includes a steel/steel sliding contact surface combination and a double-lip contact seal on both sides. The bearings require maintenance and can be relubricated via lubrication holes and an annular groove in both rings.

Designed for radial and combined radial and axial loads
Long service life
Minimal maintenance
Suitable for heavy static, alternating or impact loads

Dimensions

d	140 mm	Bore diameter
D	210 mm	Outside diameter
B	90 mm	Width
C	70 mm	Width outer ring
α	7 °	Angle of tilt
d_k	180 mm	Raceway diameter inner ring
b	13.5 mm	Width annular lubrication groove at outer ring
b₁	13.5 mm	Width annular lubrication groove at inner ring
M	6 mm	Diameter lubrication hole (outer ring)
r₁	min.1 mm	Chamfer dimension bore
r₂	min.1 mm	Chamfer dimension outer ring

Abutment dimensions

d_a	min.149 mm	Abutment diameter shaft
d_a	max.155.5 mm	Abutment diameter shaft
D_a	min.180 mm	Abutment diameter housing
D_a	max.202.5 mm	Abutment diameter housing
r_a	max.1 mm	Fillet radius shaft
r_b	max.1 mm	Fillet radius housing

Calculation data

Basic dynamic load rating	C	1 080 kN
Basic static load rating	C₀	5 400 kN
Specific dynamic load factor	K	100 N/mm²
Specific static load factor	K₀	500 N/mm²
Material constant	K_M	330

Properties

Sliding contact surface combination	Steel/steel, standard
Material, inner ring	Bearing steel
Material, outer ring	Bearing steel
Maintenance	Relubrication required
Radial internal clearance	CN
Sealing	Seal on both sides
Sealing type	Double-lip
Relubrication feature	With

Logistics

Product net weight	10.7 kg
eClass code	23-05-01-06
UNSPSC code	31171515

(GE140ES-2RS) (140X210X90)

Additional information

Weight	10.7 kg
Size (mm)	140.000×210.000×90.000
Colour	BLUE