FY 35 TF

Square flanged ball bearing unit with set screw locking, cast iron housing, ISO

These square flanged ball bearing units are compliant with ISO standards.

They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.

  • Resist high levels of contamination
  • Designed for high temperatures and speeds
  • Accommodate relatively heavy loads
  • Cost-effective

Dimensions

d
35 mm
Bore diameter
d1
46.1 mm
Outer diameter of inner ring
A
34.5 mm
Width of housing
A1
13 mm
Flange width
A3
3.2 mm
Depth of centring recess
A5
24.5 mm
Standout of end cover
B
42.9 mm
Width of inner ring
B1
42.9 mm
Overall bearing width
B4
6 mm
Distance from locking device side face to thread centre
Db1
87 mm
Top external diameter
Db2
95 mm
Base external diameter
Dc
106.4 mm
Diameter of housing centering recess
J
92 mm
Distance between attachment bolts
L
118 mm
Overall length
N
14 mm
Diameter of attachment bolt hole
s1
25.4 mm
Distance from locking device side face to raceway centre
T
46.4 mm
Overall width
THREADED HOLE
RG
1/4-28 UNF
Housing thread for grease fitting
R1
22.5 mm
Axial position of the housing thread
GREASE FITTING
DN
6.5 mm
Diameter of head sphere of grease fitting
SWN
7 mm
Hexagonal key size for the grease fitting
GN
1/4-28 SAE-LT
Thread of grease fitting
DOWEL PINS
J6
106 mm
Distance of dowel pins
J7
29 mm
Axial offset of dowel pins
N4
4 mm
Recommended diameter for dowel pins

Calculation data

Basic dynamic load rating C
25.5 kN
Basic static load rating C0
15.3 kN
Fatigue load limit Pu
0.655 kN
Limiting speed
5 300 r/min
Limiting speed with shaft tolerance h6

Mounting information

Set screw G2
M6x0.75
Hexagonal key size for set screw
3 mm
Recommended tightening torque for set screw
4 N·m
Recommended diameter for attachment bolts, mm G
12 mm
Recommended diameter for attachment bolts, inch G
0.5 in

Properties

Housing type Flanged
Flanged housing type Square
Number of bolt holes for fasteners 4
Fastening bolt hole type Plain
Retaining feature, inner ring Set screws
Bore type Cylindrical
Rubber seating ring Without
Material, housing Cast iron
Material, bearing Bearing steel
Coating Without
Sealing, bearing Seal and flinger on both sides
Sealing type Contact, standard
Sealing, unit Optional end cover
Lubricant Grease
Relubrication hole With
Grease fitting With
Compliance with standard
ISO
Purpose specific
For material handling applications
Material, housing
Cast iron
Sealing, bearing
Seal and flinger on both sides
Sealing type, bearing
Contact, standard
Sealing, unit
Optional end cover
Coating
Without

Component

Square flanged housing for insert bearings, cast iron FY 507 M
Insert bearing with set screw locking and extended inner ring YAR 207-2F

Recommended product

End cover for bearing units ECY 207

(35X118X46.4)

Additional information

Weight 1.3 kg
Size (mm)

Colour

You may also like…