These housings have been developed to be the best choice for design, quality, robustness, and cost efficiency. SAF housings, when used with SKF bearings, seals and related components, provide a tailored solution to achieve maximum service life and reduce maintenance requirements for rotating equipment.
Dimensions
| db |
104.775 mm
|
Shaft diameter |
|---|---|---|
| dc |
85.725 mm
|
Shaft diameter |
| Da |
160 mm
|
Diameter of bearing seat |
|---|---|---|
|
G7
|
Tolerance class of bearing seat diameter | |
| Ca |
49.809 mm
|
Width of bearing seat |
| H1 |
101.6 mm
|
Centre height |
| A1 |
98.425 mm
|
Foot width |
|---|---|---|
| A2 |
149.225 mm
|
Overall width |
| H |
192.484 mm
|
Overall height |
| H2 |
41.275 mm
|
Foot height |
| J |
min.263.525 mm
|
Distance between attachment bolts |
| J |
max.295.275 mm
|
Distance between attachment bolts |
| J1 |
53.975 mm
|
Distance between attachment bolts, axial |
| L |
349.25 mm
|
Overall length |
| N1 |
17.463 mm
|
Width of attachment bolt hole |
| R1 |
60.325 mm
|
Distance of drain plug from centre |
|---|---|---|
| R2 |
27.781 mm
|
Height of drain plug position |
| RG |
3/8-18 NPT
|
Thread of drain hole |
| PG |
1/8-27 NPT
|
Thread of grease fitting in cap |
| P60° |
101 kN
|
Safe load at 60° load angle |
|---|---|---|
| P90° |
60.9 kN
|
Safe load at 90° load angle |
| P120° |
38.3 kN
|
Safe load at 120° load angle |
| P150° |
34.7 kN
|
Safe load at 150° load angle |
| P180° |
42.3 kN
|
Safe load at 180° load angle |
| Pa |
27.5 kN
|
Safe load, axial |
| Housing material |
Cast iron
|
| Corrosion protection |
Paint – in accordance with ISO 12944-2, corrosivity category C2
|
| Cap bolt |
5/8-11 UNC x 3-1/2
|
|
| Number of cap bolts |
2
|
|
| SAE grade of cap bolt |
5
|
|
| Recommended tightening torque for cap bolts |
149.14 N·m
|
|
| Recommended diameter for attachment bolts | G |
15.875 mm
|
| Width of included locating ring |
9.728 mm
|
|
| Initial grease fill, 20% |
244.94 g
|
|
| Initial grease fill, 40% |
385.554 g
|
| Housing type | Pillow block |
| Housing configuration | Two-piece |
| Mounting arrangement | Through shaft/Shaft end |
| Number of bolt holes for fasteners | 4 |
| Material, housing | Cast iron |
| Bearing housing seal type | Labyrinth seal |
| Housing lubrication feature/possibility | Grease/Oil |
| Weight | 15.74 kg |
|---|---|
| Size (mm) | |
| Colour |
Petaling Jaya Motors Supply was established in 1966 providing Bearing and other industrial parts needs for various industries. Thus, in our partnership with you, we bring you our varied expertise garnered from the years of experience in these industries.
© 2026 Petaling Jaya Motors Supply Sdn Bhd (196601000054) (006532-X). All Rights Reserved.
