BS2-2206-2RS/GFP9VA944

SKF Food line spherical roller bearings are compliant with food safety regulations.

Designed with food grade seals and grease, they enhance food safety, increase reliability and support sustainable development. Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature.

• Compliant with food safety regulations
• Accommodate misalignment
• High load carrying capacity
• Low friction and long service life
• Increased wear resistance

Dimensions

d	30 mm	Bore diameter
tΔdmp	-0.01  –  0.0 mm	Deviation limits of mid-range bore diameter
D	62 mm	Outside diameter
tΔDmp	-0.013  –  0.0 mm	Deviation limits of mid-range outside diameter
B	25 mm	Width
tΔBs	-0.06  –  0.0 mm	Deviation limits of ring width
d2	≈35.8 mm	Shoulder diameter of inner ring
D1	≈56.4 mm	Shoulder/recess diameter of outer ring
b	4.4 mm	Width of lubrication groove
K	2 mm	Diameter of lubrication hole
r1,2	min.1 mm	Chamfer dimension
	Normal	ISO tolerance class for dimensions

Abutment dimensions

da	min.35.3 mm	Diameter of shaft abutment
da	max.35.5 mm	Diameter of shaft abutment
Da	max.56.4 mm	Diameter of housing abutment
ra	max.1 mm	Radius of fillet

Calculation data

SKF performance class		SKF Explorer
Basic dynamic load rating	C	66.1 kN
Basic static load rating	C0	58.5 kN
Fatigue load limit	Pu	6.4 kN
Limiting speed		650 r/min
Limiting value	e	0.31
Calculation factor	Y1	2.2
Calculation factor	Y2	3.3
Calculation factor	Y0	2.2

Tolerances of run-out

Range of section height at inner ring of assembled bearing	tKia	4 µm
Maximum run-out of inner ring side face to the bore	tSd	8 µm
Range of section height at outer ring of assembled bearing	tKea	8 µm
Perpendicularity of outer ring outside surface	tSD	4 µm
ISO tolerance class for geometrical tolerances		P5

Radial internal clearance

Minimum initial clearance	25 µm
Maximum initial clearance	40 µm