7204 BE-2RZP

Single row angular contact ball bearing with 40° contact angle and non-contact seals on both sides

These single row angular contact ball bearings, with 40° contact angle and non-contact seals on both sides, accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only.

They have a ball-centred glass-fibre reinforced PA66 cage. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.

  • 40° contact angle
  • Integral sealing prolongs bearing service life
  • Glass-fibre reinforced PA66 cage
  • Accommodate relatively high radial loads and large unilateral axial loads

Dimensions

d
20 mm
 Bore diameter
D
47 mm
 Outside diameter
B
14 mm
 Width
d1
≈30.85 mm
 Shoulder diameter of inner ring (large side face)
d2
≈25.87 mm
 Shoulder diameter of inner ring (small side face)
D2
≈37.7 mm
 Recess diameter of outer ring (large side face)
D5
≈43.2 mm
 Recess diameter of outer ring (small side face)
a
21 mm
 Distance side face to pressure point
r1,2
min.1 mm
 Chamfer dimension
r3,4
min.0.6 mm
 Chamfer dimension

Calculation data

Basic dynamic load rating C
13.3 kN
Basic static load rating C0
7.65 kN
Fatigue load limit Pu
0.325 kN
Reference speed
19 000 r/min
Limiting speed
14 000 r/min
Minimum axial load factor A
0.00113
Minimum radial load factor kr
0.095
Limiting value e
1.14
SINGLE BEARING OR BEARING PAIR ARRANGED IN TANDEM
Calculation factor (single, tandem) X
0.35
Calculation factor (single, tandem) Y0
0.26
Calculation factor (single, tandem) Y2
0.57
BEARING PAIR ARRANGED BACK-TO-BACK OR FACE-TO-FACE
Calculation factor (back-to-back, face-to-face) X
0.57
Calculation factor (back-to-back, face-to-face) Y0
0.52
Calculation factor (back-to-back, face-to-face) Y1
0.55
Calculation factor (back-to-back, face-to-face) Y2
0.93
Add to Enquiry
SKU: 7204 BE-2RZP-SKF Categories: , , ,
SKF

Description

Properties

Contact Angle : 40 °

Contact type Normal contact (two-point contact)
Number of rows 1
Locating feature, bearing outer ring None
Ring type One-piece inner and outer rings
Cage Non-metallic
Matched arrangement No
Universal matching bearing No
Axial internal clearance Not applicable
Tolerance class Normal
Material, bearing Bearing steel
Coating Without
Sealing Seal on both sides
Sealing type Non-contact
Lubricant Grease
Relubrication feature Without

(20X47X14)

Additional information

Weight 0.106 kg
Size (mm)

Colour

Related products

You may also like…