7034 ACD/P4ADBA

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

These matched sets of two super-precision, high-capacity, D design, single row angular contact ball bearings are available in a variety of arrangements.

They are designed for high-load capacity and relatively high speed operation and, compared to the equivalent SKF B and E design high-speed bearings, are best suited for heavier loads.

  • Very high running accuracy
  • Very high load carrying capacity

Dimensions

d
170 mm
Bore diameter
D
260 mm
Outside diameter
B
84 mm
Width
d1
198.7 mm
Shoulder diameter of inner ring (large side face)
r1,2
min.2.1 mm
Chamfer dimension
r3,4
min.1.1 mm
Chamfer dimension
Abutment dimensions - 7034 ACD/P4ADBAAbutment dimensions - 7034 ACD/P4ADBA

Abutment dimensions

da
min.181 mm
Diameter of shaft abutment
Db
max.254 mm
Diameter of housing abutment
ra
max.2 mm
Radius of fillet
rb
max.1 mm
Radius of fillet
dn
205.8 mm
Position of oil nozzle

Calculation data

Basic dynamic load rating C
325 kN
Basic static load rating C0
465 kN
Fatigue load limit Pu
13.4 kN
Attainable speed for grease lubrication
To be calculated: Single bearing (4800) x speed reduction factor (see table below)
Attainable speed for oil-air lubrication
To be calculated: Single bearing (7000) x speed reduction factor (see table below)
Contact angle α
25 °
Ball diameter Dw
26.988 mm
Number of rows i
2
Number of balls (per bearing) z
22
Reference grease quantity (per bearing) Gref
84 cm³
Preload and stiffness (back-to-back, face-to-face)
Preload class
A
Preload G
1 250 N
Axial stiffness
433 N/µm
Correction factors for preload calculation
Correction factor dependent on bearing series and size f
1.1
Correction factor dependent on contact angle f1
0.99
Correction factor, preload class A f2A
1
Correction factor for hybrid bearings fHC
1
Factors for equivalent bearing load calculation
Axial load factor (back-to-back, face-to-face) Y1
0.92
Axial load factor (back-to-back, face-to-face) Y2
1.4
Axial load factor (back-to-back, face-to-face) Y0
0.76
Radial load factor (back-to-back, face-to-face) X1
1
Radial load factor (back-to-back, face-to-face) X2
0.67
Radial load factor (back-to-back, face-to-face) X0
1

Description

Properties

Contact type Normal contact (two-point contact)
Number of rows 2
Ring type One-piece inner and outer rings
Design High-capacity D
Universal matching bearing No
Matched arrangement Back-to-back <>
Number of bearings in matched set 2
Matched condition (axial clearance/ preload) Extra light preload
Tolerance class P4A
Material, bearing Bearing steel
Coating Without
Sealing Without
Lubricant None
Indicative carbon footprint for new product 49.4 kg CO2e

Logistics

Product net weight 13.7 kg
eClass code 23-05-08-04
UNSPSC code 31171531
Universal matching bearing(s)
No

Aftermarket replacement

Super-precision, high-capacity, universally matchable single row angular contact ball bearing 2 x 7034 ACDGA/P4A
Verify quantity of bearing rows

(170X260X84) (7034ACDP4ADBA)

Additional information

Weight 13.7 kg
Size (mm)

Colour