7011 CD/P4ADGA

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

These matched sets of two super-precision, high-capacity, D design, single row angular contact ball bearings are available in a variety of arrangements.

They are designed for high-load capacity and relatively high speed operation and, compared to the equivalent SKF B and E design high-speed bearings, are best suited for heavier loads.

  • Very high running accuracy
  • Very high load carrying capacity

Dimensions

d
55 mm
 Bore diameter
D
90 mm
 Outside diameter
B
36 mm
 Width
d1
65.8 mm
 Shoulder diameter of inner ring (large side face)
d2
65.8 mm
 Shoulder diameter of inner ring (small side face)
D1
79.2 mm
 Shoulder diameter of outer ring (large side face)
r1,2
min.1.1 mm
 Chamfer dimension
r3,4
min.0.6 mm
 Chamfer dimension
Abutment dimensions - 7011 CD/P4ADGAAbutment dimensions - 7011 CD/P4ADGA

Abutment dimensions

da
min.61 mm
 Diameter of shaft abutment
db
min.61 mm
 Diameter of shaft abutment
Da
max.84 mm
 Diameter of housing abutment
Db
max.86.8 mm
 Diameter of housing abutment
ra
max.1 mm
 Radius of fillet
rb
max.0.6 mm
 Radius of fillet
dn
68.1 mm
 Position of oil nozzle

Calculation data

Basic dynamic load rating C
63.7 kN
Basic static load rating C0
65.5 kN
Fatigue load limit Pu
2.75 kN
Attainable speed for grease lubrication
To be calculated: Single bearing (15000) x speed reduction factor (see table below)
Attainable speed for oil-air lubrication
To be calculated: Single bearing (24000) x speed reduction factor (see table below)
Contact angle α
15 °
Ball diameter Dw
11.112 mm
Number of rows i
2
Number of balls (per bearing) z
18
Reference grease quantity (per bearing) Gref
5.1 cm³
Preload and stiffness (back-to-back, face-to-face)
Preload class
A
Preload G
150 N
Axial stiffness
67 N/µm
Correction factors for preload calculation
Correction factor dependent on bearing series and size f
1.1
Correction factor dependent on contact angle f1
1
Correction factor, preload class A f2A
1
Correction factor for hybrid bearings fHC
1
Factors for equivalent bearing load calculation
Calculation factor for equivalent loads f0
15.1
Add to Enquiry
SKU: 7011 CD/P4ADGA-SKF Categories: , , , ,
SKF

Description

Properties

Contact type Normal contact (two-point contact)
Number of rows 2
Ring type One-piece inner and outer rings
Design High-capacity D
Universal matching bearing Yes, back-to-back (<>), face-to-face (><) or tandem (>>)
Matched arrangement Universal matching
Number of bearings in matched set 2
Matched condition (axial clearance/ preload) Extra light preload
Tolerance class P4A
Material, bearing Bearing steel
Coating Without
Sealing Without
Lubricant None
Indicative carbon footprint for new product 2.7 kg CO2e

Logistics

Product net weight 0.741 kg
eClass code 23-05-08-04
UNSPSC code 31171531
Universal matching bearing(s)
Yes, back-to-back (<>), face-to-face (><) or tandem (>>)

Aftermarket replacement

Super-precision, high-capacity, universally matchable single row angular contact ball bearing 2 x 7011 CDGA/P4A
Verify quantity of bearing rows

(55X90X36) (7011CDP4ADGA)

Additional information

Weight 0.741 kg
Size (mm)

Colour

Related products