22328-2CS5K/VT143

Spherical roller bearing with tapered bore, integral sealing and relubrication features

Spherical roller bearings can accommodate heavy loads in both directions.

They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. Under normal operating conditions, sealed bearings are almost maintenance-free, keeping service costs and grease consumption low. The design includes features to facilitate relubrication.

  • Accommodate misalignment
  • High load carrying capacity
  • Sealed for increased reliability, with relubrication features
  • Low friction and long service life
  • Increased wear resistance

Dimensions

d
140 mm
 Bore diameter
tΔdmp 0.0  –  0.04 mm Deviation limits of mid-range bore diameter
tΔSL 0.0  –  0.04 mm Deviation limits of tapered slope
D
300 mm
 Outside diameter
tΔDmp -0.035  –  0.0 mm Deviation limits of mid-range outside diameter
B
102 mm
 Width
tΔBs -0.08  –  0.0 mm Deviation limits of ring width
d2
≈169 mm
 Shoulder diameter of inner ring
D1
≈261 mm
 Shoulder/recess diameter of outer ring
b
16.7 mm
 Width of lubrication groove
K
9 mm
 Diameter of lubrication hole
r1,2
min.4 mm
 Chamfer dimension
Normal
 ISO tolerance class for dimensions
Abutment dimensions - 22328-2CS5K/VT143

Abutment dimensions

da
max.169 mm
 Diameter of shaft abutment
Da
max.283 mm
 Diameter of housing abutment
ra
max.3 mm
 Radius of fillet

Calculation data

SKF performance class
SKF Explorer
Basic dynamic load rating C
1 359 kN
Basic static load rating C0
1 560 kN
Fatigue load limit Pu
132 kN
Limiting speed
560 r/min
Limiting value e
0.33
Calculation factor Y1
2
Calculation factor Y2
3
Calculation factor Y0
2

Tolerances of run-out

Range of section height at inner ring of assembled bearing tKia
8 µm
Maximum run-out of inner ring side face to the bore tSd
10 µm
Range of section height at outer ring of assembled bearing tKea
18 µm
Perpendicularity of outer ring outside surface tSD
6.5 µm
ISO tolerance class for geometrical tolerances
P5

Radial internal clearance

Minimum initial clearance
120 µm
Maximum initial clearance
160 µm
Add to Enquiry
SKU: 22328-2CS5K/VT143-SKF Categories: , ,
SKF

Description

Properties

Number of rows 2
Locating feature, bearing outer ring Without
Bore type Tapered 1:12
Cage Sheet metal
Radial internal clearance CN
Tolerance class for dimensions Normal
Tolerance class for run-out P5
Sealing Seal on both sides
Sealing type Contact
Lubricant Grease
Relubrication feature With
Candidate for remanufacturing Yes

Logistics

Product net weight 33 kg
eClass code 23-05-09-11
UNSPSC code 31171510

Recommended product

Withdrawal sleeve, basic design, ISO standards AHX 2328 G
Adapter sleeve with KM lock nut and MB lock washer, metric dimensions H 2328
Adapter sleeve with KM lock nut and MB lock washer, metric dimensions with inch bore HA 2328
Adapter sleeve with KM lock nut and MB lock washer, metric dimensions with inch bore HE 2328
Adapter sleeve with AN or N lock nut and W lock washer, inch dimensions SNW 128X4.15/16

(140X300X102) (22328-2CS5KVT143)

Additional information

Weight 33 kg
Size (mm)

Colour

Related products