3302 A-2RS1TN9/MT33

Double row angular contact ball bearing with seals

Double row angular contact ball bearings, with seals, correspond to a pair of single row angular contact ball bearings in a back-to-back arrangement, while requiring less axial space.

Depending on the sealing execution, they can operate at high speeds and are more suitable than deep groove ball bearings for supporting large axial forces in both directions.

  • High-speed capability
  • Accommodate relatively high radial loads, high axial loads in both directions and tilting moments
  • Suitable where a stiff bearing arrangement is required
  • Require less axial space than equivalent pair of single row angular contact ball bearings
  • Integral sealing prolongs bearing service life

Dimensions

d
15 mm
Bore diameter
D
42 mm
Outside diameter
B
19 mm
Width
d2
23.7 mm
Recess diameter inner ring shoulder
D2
35.65 mm
Recess diameter outer ring shoulder
r1,2
min.1 mm
Chamfer dimension inner ring
a
24 mm
Distance pressure point(s)

Calculation data

Basic dynamic load rating C
15.1 kN
Basic static load rating C0
9.3 kN
Fatigue load limit Pu
0.4 kN
Limiting speed
12 000 r/min
Calculation factor kr
0.07
Limiting value e
0.8
Calculation factor X
0.63
Calculation factor Y0
0.66
Calculation factor Y1
0.78
Calculation factor Y2
1.24

Description

Properties

Contact angle : 30 °

Contact type Normal contact (two-point contact)
Number of rows 2
Locating feature, bearing outer ring None
Ring type One-piece inner and outer rings
Cage Non-metallic
Arrangement of contact angle (double-row bearing) Back-to-back (O)
Matched arrangement No
Universal matching bearing No
Axial internal clearance CN
Material, bearing Bearing steel
Coating Without
Sealing Seal on both sides
Sealing type Contact
Lubricant Grease
Relubrication feature Without

(15X42X19) (3302A2RS1TN9MT33) (3302A-2RS1TN9/MT33) (3302A-2RS1TN9-MT33) (3302-A-2RS1TN9-MT33) (3302-A-2RS1TN9/MT33)

Additional information

Weight 0.13 kg
Size (mm)

Colour

You may also like…