Description
Properties
| Taper | 1:12 |
| Holes for oil injection | Without |
AHX 3024
Withdrawal sleeve, basic design, ISO standards
Withdrawal sleeves are slit tapered sleeves that are used to mount bearings with a tapered bore onto the cylindrical seat of stepped shafts.
This AH(X) sleeve has dimensions in accordance with ISO standards and is a basic design for mounting and dismounting. The sleeve is located on the shaft by a lock nut or an end plate. The lock nuts and appropriate locking device can be ordered separately. End plates are not manufactured by SKF.
- Cost effective
- Quick and easy mounting
Dimensions
| d1 |
115 mm
|
Bore diameter |
|---|---|---|
| d |
120 mm
|
Outside diameter small taper |
| B1 |
60 mm
|
Width |
| B2 |
64 mm
|
Width sleeve and bearing before sleeve is driven into bore |
| G |
M130x2
|
Thread |
| G1 |
13 mm
|
Length thread |
|
1:12
|
External taper |
Additional information
| Weight | 0.73 kg |
|---|---|
| Size (mm) | |
| Colour |
Related products
-
N 038
-
N 044
-
SNW 130X5.3/16
-
SNW 128X4.15/16
