71936 ACD/P4ATBTB
Matched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
These sets of three matched super-precision angular contact ball bearings are available as universally matchable bearings or as preconfigured arrangements.
Sets arranged in back-to-back and tandem, or face-to-face and tandem, are available in different preload classes and correct mounting results in preload within a predetermined range, without the need for shims or similar devices. Sets of three bearings paired in tandem need to be mounted against a single bearing, or another set of bearings in tandem, to achieve the desired preload. The bore and outside diameters of the bearings are matched to within a maximum of one-third of the permitted diameter tolerance, to provide better load distribution than single universally matchable bearings.
- Very high running accuracy
- High axial and radial stiffness
- High axial and radial load carrying capacity
Dimensions
| d |
180 mm
|
Bore diameter |
| D |
250 mm
|
Outside diameter |
| B |
99 mm
|
Width |
| d1 |
201.6 mm
|
Shoulder diameter of inner ring (large side face) |
| r1,2 |
min.2 mm
|
Chamfer dimension |
| r3,4 |
min.1 mm
|
Chamfer dimension |
Abutment dimensions
| da |
min.189 mm
|
Diameter of shaft abutment |
| Db |
max.245 mm
|
Diameter of housing abutment |
| ra |
max.2 mm
|
Radius of fillet |
| rb |
max.1 mm
|
Radius of fillet |
| dn |
207.4 mm
|
Position of oil nozzle |
Calculation data
| Basic dynamic load rating |
C |
345 kN
|
| Basic static load rating |
C0 |
600 kN
|
| Fatigue load limit |
Pu |
17.3 kN
|
| Attainable speeds |
|
Refer to catalogue data or contact SKF for the attainable speeds
|
| Contact angle |
α |
25 °
|
| Ball diameter |
Dw |
22.225 mm
|
| Number of rows |
i |
3
|
| Number of balls (per bearing) |
z |
27
|
| Reference grease quantity (per bearing) |
Gref |
54 cm³
|
Preload and stiffness (back-to-back, face-to-face)
| Preload class |
|
B
|
| Preload |
G |
2 700 N
|
| Axial stiffness |
|
842 N/µm
|
Correction factors for preload calculation
| Correction factor dependent on bearing series and size |
f |
1.3
|
| Correction factor dependent on contact angle |
f1 |
0.98
|
| Correction factor, preload class B |
f2B |
1
|
| Correction factor for hybrid bearings |
fHC |
1
|
